Heart of autumn

This tutorial was written in Corel X5, it is written in hopes 

you have a working knowledge of Paint Shop Pro 

or another graphics program…

This is inspired by the creative work of

Pink Paradox Productions, using her kit

Pumpkin Mocha

She sells it at her store

Here Pink Paradox Productions

I am using the very talented work of

VaryMany she sells the tube I got

At Pics for Design

Here PFD~Pics For Design

I also used a FTU Mask By Dee

You can find all of her freebies on her blog

Here Dee~Dangerously Delicious

This tube has a few layers, and you can also colorize any of them to suit your tagging needs…

I used the orange and brown to match the kit I’m using

Open a 700x700 size tag, you can re-size it later

Frame 1 c/p re-size by 50% leave in the middle of your tag…

95 c/p re-size by 50% pull it to the bottom edge of frame; the next element will cover most of it….

87 c/p re-size by 45% pull to the very bottom of your frame, and then pull it behind the frame, where it looks like it is a bridge in the background…

157 c/p re-size by 35% pull to the right hand side of the bridge…

21 c/p mirror re-size by 15% pull to the left hand edge of the bridge, his back should just match the left hand edge of the frame…

90 c/p re-size by 45% pull to the right hand inside of the frame…

Go back to the top of your frame, open 97 c/p re-size by 80% pull to the bottom of the frame,

96 c/p re-size by 70% pull to the front of the bricks, then add a high pass sharpen

Radius 10

Strength 15

Hard Light

Then take the element again and mirror it and pull just over the top of the other leaves.

148 c/p rotate 45° to the left flip vertical, re-size by 40% pull to the lower left hand edge of your frame…

64 c/p re-size by 15% pull to the left hand edge of leaves…

14 c/p re-size by 20% pull to sit beside the barrel…

Now take the merged layer of your tube, c/p re-size it by 40% then pull to the right hand edge of your frame…

117 c/p re-size by 30% pull to the bottom left behind the tube…

12 crop out the left hand butterfly, paste as a new layer, rotate 45° to the left and pull it to the upper left hand edge of your tag re-size by 35%, now take the other butterfly crop it out, then paste it and re-size 35%,then  pull  it to the upper right hand edge of frame…

1 c/p re-size by 25% pull to the right hand edge of your tube…

24 c/p re-size by 15% pull to make it look like it is sitting on the barrel…

22 c/p re-size by 20% pull to the top of leaves, so it looks’s like the bird is sitting on them…

23 c/p re-size by 35% pull over her right hand boot…

124 c/p re-size by 30% pull to the bottom of the cat…

35 c/p re-size by 15% pull to the left bear…

146 c/p re-size by 65% pull it down so it does not cover up the bird, just over the gnome’s upper knee…

163 c/p flip vertical re-size by 45% pull to the top part of your tag, just over the butterflies…

Now open paper11 flood fill your very bottom layer, and apply DDWinterMask_12 from above, merge them into one group, then up-size it by 110%, then add a sharpen more to the group…

Go back to the upper top most layer of your tag, add a new one, add your copyright and give credit to kit maker if it’s in her TOU’s.

Add what ever saying you wish to have on your tag, and your done..

Thank you for reading my tutorial, I’d love to see if you make something…

Tag for Carrie and Dee