My Blinkies :)
Creative Fabrica
Creative Teams
Artists and Store I like
Showing posts with label AlecRud. Show all posts
Showing posts with label AlecRud. Show all posts
Mar 6, 2023
Wild Flowers Walk
This tutorial is written in Corel 2021, but any version should work, this is written in hopes you have working knowledge of Paint Shop Pro or other graphics program… this is written by me, never meant to copy or look like your work…
I am using a PTU kit
By Irish Princess Designs
Called Wildflowers
You can find her kits
&
I am using an exclusive Tube
By Alec Rud
Rachel mask 855
Here Rachel's Blog Spot
Open a 750x750
Frame 8 c/p size this down by 60%
128 c/p rotate 45° to the left, size down by 40% pull behind the frame on the upper left
16 c/p size this down by 33% pull to sit on right of the yellow flowers on left edge of the frame
190 c/p mirror size this down by 22%pull to sit in the limbs on left edge of the tag
65 c/p size this down by 45% pull to the right edge of the frame
102 c/p size this down by 80% pull to the bottom of the frame
66 c/p size this down by 31% pull to the far left edge of the grass
Take the tube we are using c/p size her down by 17% pull to the middle of the grass
69 c/p size this down by 29% pull to the very far right of the tag
53 c/p size this down by 15% pull to sit on right side of the tag
74 c/p size this down by 60% pull to the top of the tag
51 c/p mirror size this down by 15% pull to sit in front of left tire
54 c/p mirror size this down by 6% pull to sit in front of the birdhouse
194 c/p size this down by 15% pull to the middle of the tag
Click on bottom layer of your tag open paper25 size this down to 705 pixels paste as a new layer, then apply mask from above ,merge into one raster layer click on top most layer of your tag
Make a new raster layer for the copyrights and credit to the kit maker, add a saying to the tag and you’re done…
Thank you for reading my tutorial
©LadyDragus~2023
Jul 27, 2020
Mysterious Forest
Fairy
This tutorial is written in Corel X5, but any version
should work, this is written in hopes you have
working knowledge of Paint Shop Pro or other graphics program… this is
written by me, never meant to copy or look like your work…
I am using a PTU kit by
Honored Scraps
Called
Mysterious Moments
She sells in these stores
&
&
&
I am using a Exclusive tube
By Alec Rud
Open a 725x725
Frame 3 c/p size it down by 60%
E49 c/p pull the right side of the leaves to the right
on the frame crop the left leaves and move to the left edge of the frame,
duplicate this layer then flip vertical rotate 90° to the let pull to cover up
more of the frame
E21 c/p pull behind all of the leaves
E2 c/p then; pull it to the left edge of the frame,
add this drop shadow
Vertical 5
Horizontal 3
Opacity 65
Blur10
Color black
E04 c/p size it down by 60%, then pull to the far left edge of
the tag, it will cover up the golden stem
E53 c/p mirror size it down by 85% pull to the upper
top of the frame
Take the version of the tube you wish to use I’m using
green colors and the squirrel sitting in her hand , size her down by 35% then
pull to the middle of the tag
E30 c/p size it down by 30% pull to sit in between
leaves on right edge of your tag
E45 c/p size the box down by 50% pull to the lower
left of your tag
E35 c/p mirror then size thee flower down by 35% pull
to sit by her knees
E31 c/p size down by 35% pull to the left of other
flower
E56 c/p size it down by 55% pull to sit in front of
white flower
E16 c/p size the butterflies down by 70% add drop
shadow from above pull to the left edge of your tube
E74 c/p size the glass down by 55% pull to the far
right hand edge of your tag
Click on bottom layer of your tag take E27 paste size
it down by 55% apply the Copies Settings below
Click on bottom behind the gold
Open paper 6 using your shape tool draw a circle
behind , then make that a raster layer …
Click on top most layer of your tag add a new layer
for your copyrights and credit to kit maker, add a saying to the tag and you’re
done
Thank you for reading my tutorial
© LadyDragus ~2020
May 7, 2020
Nov 26, 2019
Vintage Rose
This tutorial is written in Corel X5, but any version
should work, this is written in hopes you have
working knowledge of Paint Shop Pro or other graphics program… this is
written by me, never meant to copy or look like your work…
I am using a PTU kit
By Scrappin With Lil Ole Me
I got this as part of the Mystical Scraps Store CT
Team
I am using a PTU tube
By Alec Rud
Here ~PFD~Alec Rud
Open a 715x715
E13 c/p rotate 90° to the right
E40 c/p size the lights down by 50%pull to the top of
frame
Add this drop shadow
Vertical 5
Horizontal 3
Opacity 75
Blur 5
Color black
E44 c/p size down by 35% pull to the lower right hand
edge of your frame
E81 c/p size the books down by 26% pull to the left of
the suitcase
E34 c/p size the ribbon down by 50% pull to the upper
left of the lights
E49 c/p resize the flower by 16% pull to the center of
the bow
E127 c/p size the ribbon down by 45% pull to the
bottom left edge of your frame
E180 c/p size it down by 34% pull to sit in the middle
of ribbon
Take the tube we are using c/p the layers of color you
wish to use, size her down by 26% pull to sit on suitcase
E69 c/p size down by 21% pull to sit on left of books
E47 c/p size the bag down by 21% pull to sit on the
right of her feet
E106 c/p size down by 33% pull to sit on the box with
the rose
E50 c/p size the watch down by 10%; then pull it to
make it look like she is holding the watch
E14 c/p size down by 15% pull to sit in front of pink
rose box
E46 c/p size it down by 15% pull to the left side of
white paper flower
E59 c/p size down by 21% pull to sit on right hand
edge of bag
E43 c/p size down by 26% pull to sit by paper flowers
E71 c/p mirror size it down by 26% pull to the far
right hand edge of the tube
E100 c/p size the sparkle’s down by 50% pull to the
upper left by pink flower
Click on the bottom layer of your tag, open up Paper4
draw a rectangle behind the frame, merge into a raster layer
Click below that layer E123 c/p pull one to the upper
left side of the frame, c/p mirror and pull a 2nd copy to the upper
right move so the rose is showing on both sides..
Click on top most layer of your tag add a new raster
layer for your copyright’s and credit the kit maker if she/he requires it, add
a saying and you’re done.
Thank you for reading my tutorial
©LadyDragus~ November 26, 2019
Jul 6, 2019
This tutorial is written in Corel X5, but any version
should work, this is written in hopes you have
working knowledge of Paint Shop Pro or other graphics program… this is
written by me, never meant to copy or look like your work…
I am using a PTU kit
By Lil Miz Brainstorm
You can find this kit
I am using the PTU artwork
Of Alec Rud
Here PFD~ Alec Rud ~
Open a 725x725
E40 c/p size down by 79%
E7 c/p size down by 50% pull to the upper left hand
edge of your frame…
E93 c/p mirror size down by 65% pull to the lower left
of your frame…
E92 c/p pull to the lower right side of your frame…
E23 c/p size down by 60% pull to sit on the right side
of your tag…
E6 c/p size down by 51% pull to sit on the top middle
of the frame…
Take the tube you want to use make sure your layers
are the color you want on the tube, paste size her down by 25% pull to the
bottom of the tag…
E15 c/p size down by 51% pull to float over her tail…
E10 c/p size down by 51% pull to sit on the bottom of
grass…
E14 c/p size down by 30% pull to stand in front of the
tag…
E78 c/p size down by 18% pull to sit just to the right
of octopus…
E90 c/p pull to the left hand edge of your tag, add a
sharpen more x2 so the bubbles show up better…
E1 c/p size it down by 25% pull it so it is on the
right side of the crab…
E34 c/p leave as I falls on the tag
Go to the bottom raster layer of your tag
E18 c/p pull 1 to the upper left behind the frame,
take a 2nd copy flip vertical mirror , then pull to the bottom right
of your frame…
Click on top most layer of your tag add a new raster
layer for your credits and copyrights for artist; add a saying to the tag and
your done (size down to 700x700)
Thank you for reading my tutorial
©LadyDragus ~ July 6, 2019
Apr 11, 2018
Spring Time
This tutorial is written in Corel X5, but any version
should work, this is written in hopes you have
working knowledge of Paint Shop Pro or other graphics program… this is
written by me, never meant to copy or look like your work…
I am using a PTU kit
By KCreations
Called Happy easter
You can find this in her stores
I am using a PTU tube
Alec Rud
You can find his pics
Here PFD~ Alec Rud
I am using a FTU mask
By Rachel 705
Here Rachels Designs
Open a 725x725 size tag, you can re-size at the end
E34 c/p re-size by 54% pull to the middle of your tag
E12 c/p re-size by 59% pull to the bottom of the
fence…
E25 c/p re-size by 29% pull to the right side of the
tree…
E9 c/p re-size by 23% pull to the left hand edge of
your tag…
E64 c/p re-size by 23% pull so stand in front of tree,
add a few closer to the other grass,
Take the tube you want to use, paste her and re-size
to fit the tag
E33 c/p re-size by 49% pull to the left end of the
fence…
E51 c/p mirror re-size by 23% pull to the 2nd
type of grass on the right hand edge of your tag…
Take your tube the full size version paste and re-size
her by29% pull so that the bottom of her dress is over the grass by the tree…
E36 c/p re-size by 29% pull 1 copy in front of your
tube copy the 2nd one to the knees on the tube…
E3 c/p re-size by 14% pull it to sit on the legs of
your tube, or beside her…
E96 c/p re-size by 14% pull 1 copy to the far right
and a 2nd copy to the left hand edge of your tag…
E5 c/p re-size by 14% pull to sit in the middle of
grass…
E37 c/p re-size by 14% pull to sit on the right side
of the tube…
Go to bottom layer of your tag flood fill with paper 6
apply mask from above one you like
Go back to top most layer add a new raster layer for
the copyrights and credits for the kit maker and artist…
©LadyDragus ~ April 2018
Tag for kit maker
Oct 6, 2017
Camping Fairy
This tutorial is written in Corel X5 but any version
should work, it’s written in hopes you have a working knowledge of Paint Shop
Pro or other graphics program… This is not meant to copy or look likes your
work, if it does its purely coincidental and unintentional…
I am using a PTU kit
By Angel Wing Creations
Called Camping Weekend
You can find all of her goodies
Here Angel Wings Goodies
I am using the PTU artwork of
Alec Rud
You can find his work
Here PFD~Alec Rud
I am using a FTU mask (686)
By Rachel Here
Open a 725x725 size tag
18 c/p re-size by 75% leave in the middle of your tag…
E60 c/p re-size by 65% pull to the far left hand edge
of your house…
E10 c/p re-size by 25% pull to sit in front of grass…
E66 c/p re-size by 45% pull to the right hand edge of
the house…
E38 c/p re-size by 55% pull to the right hand edge of
your tag…
Take the re-sized down version of your tube (600pixles
in height) c/p re-size it again by 75% pull to sit on the picnic table…
E61 cp re-size by 45% pull to the left hand edge of
your house…
E33 c/p re-size by 35% pull to sit in front of grass
on left side of your tag…
E2 c/p mirror re-size by 25% pull to stand by table…
E4 c/p re-size by 15% pull to sit just above the deer
on the table…
E3 c/p re-size by 25% pull to lay in front of the
deer…
E40 c/p re-size by 15% pull to sit beside the deer…
E52 c/p mirror re-size by 35% pull to sit on edge of
fire…
E8 c/p re-size by 20% pull to sit on top of the sign
by the house…
Now go to bottom layer of your tag flood fill with paper
1 apply mask from above, then merge them into one layer…
Now go back to top most layer of the tag make a new
raster layer add your copyright and credit to kit maker add a saying and your
done…
Thank you for reading my tutorial
©LadyDragus~ October 2017
Tag for mask maker
Mar 27, 2017
The color of Ruby!
This tutorial is
written in Corel X5, but any version should work, it’s written in hopes you
have a working knowledge of Paint Shop Pro, or other graphics program…
This is written by
me, not meant to copy or look like others work…
I am using
Gimptastic Scarps
part of the
Jeweld Collab
That was at CDO
You can find all of
Amy’s Kit’s
I am using a PTU tube
By Alec Rud
You can find all of
his/her artwork
I am using a FTU mask
By Dragonfly
_0002Dfly
Open a 715x715 size
tag
Frame 4 c/p re-size
by 85%
E24 c/p pull behind
your tube flip vertical , pull to the top of your frame…
E5 c/p pull to the
far right hand edge of your tag…
E12 c/p rotate 90° to
the left pull to the far left hand edge of your tag…
Take the sized down
version of your tube paste pull it to the bottom of the frame…
E11 c/p re-size by
85% pull to the lower right hand edge of your tube…
E22 c/p re-size by
60% pull to the far left hand edge of your tag…
E2 c/p re-size by 50%
pull to the left of pillow…
E27 c/p re-size by
75% pull to the middle of your tag…
E3 c/p re-size by 60%
pull to the left of mug…
E1 c/p re-size by 60%
pull to the right of mug…
E29 c/p re-size by
50% pull to sit in her hand make it look like she is holding it up…
Go to bottom layer of
your tag flood fill with paper 2 apply mask from above, up-size to 105% merge
into one raster…
Now go back to top
most layer and add a new raster for your copyright’s and credit the kit maker,
add a saying and your done…
Thank you for reading
my tutorial
© LadyDragus ~ March
27, 2017
Tag for kit maker, and mask maker
Mar 23, 2017
In Bloom
This tutorial is
written in Corel X5, but any version should work, its written in hopes you have
a working knowledge of Paint Shop Pro or other graphics program… This is
written by me never meant to look like your work…
I am using a PTU kit
By
Bookworm Dezines
She sells at a few stores you can find them all
I am using the PTU
artwork
Of Alec Rud
You can find all of
his artwork
I am using a FTU
template by
Bookworm and Millies
PSP Madness (March2013 collab #2)
Remove the background
white on bottom layer
Raster 1 flood fill
with paper 13
Raster 2 and 3 flood
fill with paper 5
Raster 4 flood fill
with paper17
E1 c/p re-size by 80%
pull even with the out side of circle…
Raster 7 flood fill
with paper 2
Raster 8 flood fill
with paper 7
Raster 9 flood fill
with paper 1
Raster 10 flood fill
with paper 11
E18 c/p re-size by
60% pull to make it look like it’s hanging off the flower frame…
E44 c/p re-size by 50%
pull to the far right hand edge of your tag…
E17 c/p re-size by
50%pull to hang off the string just above the lights…
Raster 11 flood fill
with paper 1
Merge 12 and 11 into
one raster layer
Add this drop shadow
Vertical 5
Horizontal 2
Opacity 40
Blur 5
Color black, hide the
words, click on layer below them paste a sized down version of the tube your
using, I make mine at 600pixles high…
E11 c/p re-size by
25% mirror pull to sit by her knee
E24 c/p re-size by
20% pull to the tubes “feet” …
E41 c/p mirror
re-size by 30% pull to hang off the right side of cans…
E40 c/p re-size by
30% pull to sit on top of cans/leaves…
E42 c/p re-size by
30% pull to the right of cans…
E7 c/p re-size by 20%
pull to the left of cans…
E46 c/p re-size by
50% pull to the left hand edge of your tag…
Unhide the words on
the template, move to fit in the middle of the right side of tag..
Add a new raster
layer for your copyright and credit for kit maker and a saying and your done…
Thank you for reading
my tutorial
©LadyDragus ~ March
23, 2017
Tag for kit maker and template collab
Jan 25, 2017
Bleeding Heart Cluster frames
Be still my bleeding heart
PTU Kit by Irish Princess Designs
I made up a new set of clusters for you all
You can find her clusters in 2 stores
Here Smiley Creations
&
Here Hania Designs
I also mad up a V-day snags
Dec 19, 2016
This tutorial is written in Corel X5 but any version
should work. It’s written in hopes you have a working knowledge of Paint Shop
Pro or other graphics program… It’s written by me, never meant to copy or look
like others tags…
I am using a
PTU Kit
By
Designz By Shelly
She sells at a few stores you can find them all on her
blog
Here Designz By Shelly
I am using the PTU artwork of
Alec Rud
He sells all his tubes at
Pics For Designs
I am using a winter mask by Dee
Font Papyrus, and using a gold gradient for the
background of the font…
Open a 725x725 you can size down when done
8 c/p re-size by 65%
19 c/p re-size by 45% pull to the far right hand of
your window…
24 c/p re-size by 40% pull to the far left hand edge of
your window…
22 c/p re-size by 45% pull to the lower left hand edge
of your tag…
Take the re-sized down version of your tube merged
with what ever layers you want to use….
1 c/p re-size by 35% pull to stand in front of your
tubes feet…
30 c/p re-size by c/p mirror 15% pull to sit beside
bear…
44 c/p re-size by 15% pull to sit by her arms…
12 c/p re-size by 15% pull to the left of bear…
34 c/p re-size by 15% pull to the right of cookies…
2 c/p re-size by 15% mirror pull it stand by mouse
59 c/p re-size by 15% pull to the sit on the right
hand edge of drink…
78 c/p re-size by 15% pull to the left hand edge of
box…
6 c/p re-size by 15% pull to sit on top of box…
17 c/p re-size by 20% pull to the far right hand edge
of your tag…
Go to bottom layer flood fill with paper2 apply mask from
above, merge into one raster…
Go to the top most layer add a new raster layer
for your copyright’s and credit for kit
maker if she requires it.. Add what ever saying you want and your done…
Thank you for reading my tutorial
©LadyDragus Dec~2016
Tag for kit maker
And mask maker
Subscribe to:
Posts
(Atom)
Kit Match For
Stores I Sell At
Blog Trains for HODG
Forums
Blogs I follow
.gif)
