My Blinkies :)
Creative Fabrica
Creative Teams
Artists and Store I like
Midnight Margaritas
This tutorial is written in Corel 2023, but any version should work, this is written in hopes you have working knowledge of Paint Shop Pro or other graphics program… this is written by me, never meant to copy or look like your work…
I am using a PTU kit
By Happy Pumpkin Studio
Called Midnight Margaritas
You can find this kit
Here
Midnight Margaritas'
I am using a PTU tube done
By Jenny called Annabella
You can find this tube
Here Annabella ~ Jenny
RD_mask827 Mask 825-828
Open a 775x775 size tag (size down a the end)
Frame 22 c/p size this down by 45%
157 c/p 25% pull to the left side of the frame
115 c/p size this down by 45% pull to the far right edge of the frame
190 c/p size this down by 21% pull to the upper right of the wood
Take the full sized version of the tube we are using c/p size her down by 16% pull to sit in front of the wood
105 c/psize this down by 29% pull to the bottom of the wood/tube
17 c/p size this down by 24% pull to sit on bottom left of the frame
262 c/p size this down by 23% pull to sit in the middle of the tag in front of the tube
149 c/p size this down by 15% pull to sit in front of cauldron
18 c/p size this down by 15% pull to cover the drink on the cauldron
261 c/p size this down by 15% mirror pull to sit on top of the wood by the flowers
60 c/p size this down by 11% pull to sit in between the crab and lizard
180 c/p size this down by 11% pull to the right edge of the lizards tail
78 c/p size this down by 15% pull to sit on top of the totem on the left edge of the tag
242 c/p size this down by 15% pull behind the bat on the left edge of the tag
147 c/p size this down by 15% pull to the middle bottom of the tag
Click on bottom layer of your tag
Take paper 9 flood fill the bottom layer apply mask from above, then merge this layer into one
Click back on the top layer of add a new raster layer add your copyright’s and a saying for the tag
Thank you for reading my tutorial
©LadyDragus Tag for kit maker and mask maker
Pretty Spring Day
This tutorial is written in Corel 2023, but any version should work, this is written in hopes you have working knowledge of Paint Shop Pro or other graphics program… this is written by me, never meant to copy or look like your work…
I am using a PTU kit
By Moonshine Dezinz
Called Pretty Spring Day
I am using a PTU tube
By Misticheskaya
Named Taya
You can find this tube
Here Taya
Open a 750x750 size tag
Rachel Desings 163 Mask 1
Rachels Wordpress Blog
Drop Shadow for this tag
Vertical 5
Horizontal 3
Opacity 65
Blur 5
Color black
E40 c/p size this down by 51%
27 c/p size this down by 30% pull to the lower right of the frame
71 c/p size this down by 31% pull to the far left edge of the frame
76 c/p size down by 30% pull to sit in the middle of the E71 now duplicate E71 pull this in front of the bottle, clean off any that is on the back of the element, so it shows the bottle sitting inside of the E71
75 c/p size this down by 40% pull to stand in front of the bottle
5 c/p size this down by 25% pull to sit on the left edge of the grass
87 c/p mirror size this down by 30% pull to sit on the left edge of the mushroom
61 c/p size this flower down by 30% pull to sit ono the right side of the mushroom
Take the tube I colorized to fit the kit on her hair c/p size this down by 30% mirror her then pull so her feet cover up the bottom of the flowers on the right
21 c/p size this down by 21% pull to stand in front of the tall pink flower
24 c/p size this down by 16% pull to sit in front of the other pink flower with it’s own ladybug
38 c/p size this down by 16 pull the little bird to sit on her foot
13 c/p size this down by 10% pull to fly right above the cap on the bottle, then use the drop shadow from above
16 c/p size this down by 24% pull to sit in front of her knees
9 c/p size this down by 20% pull to sit on the right edge of the ice cream
18 c/p size this down by 20% pull to sit just under the bird
49 c/p size this down by 11% pull to sit on left edge of the basket
33 c/p size this down by 12% pull to sit in front of the ice cream
53 c/p size this down by 12% pull to sit beside the flowers with the ladybugs
68 c/p size this down by 15% pull so it looks like he is eating from the pink flower behind our tube, then add the drop shadow from above
78 c/p size these butterfly’s down by 20% pull to fly above the bottle, then add the drop shadow from above
Click on bottom layer of your tag open paper 4 size this down to 700x700 then paste as a new layer, then apply the mask from above then merge this into one layer.
Click on top most layer of your tag add a new raster layer, for you to add the copyrights and a saying to the tag, remember this artist does not allow blank tags it must have a saying on the tag
Thank you for reading my tutorial
©LadyDragus~ 2026
Tag for kit maker
Honey Bee
This tutorial is written in Corel 2023, but any version should work, this is written in hopes you have working knowledge of Paint Shop Pro or other graphics program… this is written by me, never meant to copy or look like your work…
I am using a PTU kit
By Chrisje’s Dreams
Called Honey Bee
She currently is selling in two stores
Her Personal payhip
Magical Moments Store
I am using a PTU tube
By Fiodorova Maria
She is selling her tubes
Font Cubic
Rachel Mask Set163-1
Here Rachel Designs Blog
Open a 750x750
Frame 1 c/p size this down by 60% leave this as it falls on the tag
Take the tube we are using c/p size her down by 34% pull to the bottom of the frame, now duplicate the frame, move above the tube clean off the top part of the frame so it shows the whole tube
2 c/p size this down by pull to the right side of the frame
115 c/p size this down by 40% pull to the left of the tag
65 c/p size this down by 19% pull to sit in front of the fence
9 c/p mirror size this kitten down by 15% pull to the right edge of the frame
100 c/p size this down by 14% pull to sit on left of the kitten
96 c/p size this down by 23% mirror pull to sit on the right edge of the tag
121 c/p size this down by 14% pull to sit on the left side of the honeybee bear
6 c/p size this down by 10% pull to the middle of your tag
81 c/p size this down by 10% pull to sit by the gnome
1 c/p size this down by 20% pull to sit on top middle of the fence on left side of your tag
Click on bottom layer of your tag
116 c/p size this down by 40% pull to the fill the inside of the frame
Go down one layer flood fill with paper, apply the mask from above or one you like better
Click on top most layer add a new layer for the credit and copyrights for the tube, add a saying to the tag and you’re done…
Thank you for reading my tutorial
©LadyDragus~2025
Tag for kit maker
Spooky Autumn
This tutorial is written in Corel 2023, but any version should work, this is written in hopes you have working knowledge of Paint Shop Pro or other graphics program… this is written by me, never meant to copy or look like your work…
I am working with our new kit
Spooky Autumn
You can find this in our store
Here House of Dragus Graphics Store
I am using a PTU tube
By Yulya
Called
Selena (Extended Edition)
You can find her
Here Selena
RRMask Set 12-1
You can find all of her older mask
Open a 750x750 size tag, you can size down at the end
Frame 7 c/p size this down by 60%
104 c/p size this down by 60% pull to the far left edge of the frame
52 c/p mirror size this down by 55%pull to the far right edge of the frame
42 c/p size this down by 35% pull to the far left edge of the fence
Take the colorized version of the tube you wish to use, i’m also using the skeleton, with the scythe, c/p size her down by 15% mirror her and pull to sit on in front of purple three
28 c/p pull this to the bottom of the tag, size it down by 65%
36 c/p size this down by 16% pull to the left edge of the fog
50 c/p size this down by 31% pull to sit in front of the book with the tube
20 c/p size this down by 14% pull to sit by skeleton with the book
45 c/p size this down by 25% pull to sit in front of her feet
5 c/p size this down by 25% pull to the upper left top edge of the tag
80 c/p size this down by 17% pull to sit in between purple pumpkin and the cauldron
116 c/p size this down by 35% pull to sit on right edge of the purple pumpkin
29 c/p size this down by 11% pull to float above the cauldron
69 c/p size this down by 14% pull to sit on left edge of the cauldron
11 c/p size this down by 14% pull to sit on left of the skulls
117 c/p size this down by 11% pull to the far right edge of the tag
78 c/p size this down by 11% pull to sit on right edge of the other bottle
116 c/p size this down by 11% pull so the skull is sitting on the purple pumpkin on left side of your tag
Click on bottom layer of your tag
Open paper 5 size this down by 700x700 apply mask from above, then merge this into one layer
Click back on top most layer of your tag add a new raster layer for the credits and copyright’s for tube, make sure you have a valid License number to use this artist work, You can add a saying to the tag and you’re done…
Thank you for reading my tutorial
©LadyDragus~2024
I also made a FTU Cluster Frame for you all to use
**note I do not allow others to make free clusters of my PTU kits**
FTU Spooky Autumn Cluster
Underwater Princess
This tutorial is written in Corel 2021, but any version should work, this is written in hopes you have working knowledge of Paint Shop Pro or other graphics program… this is written by me, never meant to copy or look like your work…
I am using a PTU kit
By DeniseC Art
Called Vibrant Underwater World
You can find it in her stores
I am using a PTU tube
By Misticheskaya
Called Princess of Fish’s
I do love that she lets us colorize some parts of the clothes on the tube, make it match our kits better or the kit match the tube
You can find all of her tubes
Here Misticheskaya
Mask 163-Mask1
(its on the right side of her blog in bulk downloads)
Here Rachel Masks
Open a 750x750 (size down at the end)
7 c/p size this down by 55% leave as it falls on the tag
25 c/p size this down by 47% pull to the bottom of the frame
Take the version of the tube we are using, I used a purple and pink form the kit to colorize the dress and hair
C/p size her down by 22% pull to the middle of the frame
4 c/p size this down by 26% pull to sit in front of the tube
27 c/p size this down by 25% pull to the right edge of the plants
11 c/p size this down by 25% pull to the left edge of plants
28 c/p size this down by 21% pull to sit on very right edge of the house,
14 c/p size this down by 16% pull to float about the rock archway
8 c/p mirror size this down by 16% pull to float above the house, on right side of the tag
6 c/p size this down by 11% pull to float above the octopus on left edge of the frame
48 c/p size this down by 11% pull to the right edge of tag above the 2nd octopus
40 c/p size this down by 11% pull so the mouth of the fish is even with her left hand
17 c/p size this down by 11% pull to the upper hand on the tube
Click on bottom layer of the tag
Open paper5 size this down to 705x705 paste as a new layer apply mask from above, then merge into one layer…
Click on top most layer of the tag , add a new raster layer for the copyrights and credit to the kit maker, add a saying the tag and you’re done…
Thank you for reading my tutorial
©LadyDragus~2024
I also made a checking in snags
Winter Cabin
This tutorial is written in Corel 2021, but any version should work, this is written in hopes you have working knowledge of Paint Shop Pro or other graphics program… this is written by me, never meant to copy or look like your work…
I am using a PTU kit
By Angel Wing Scraps
Called Winter Cabin
You can find all of her stores
I am using 2 tubes by Nocturne
1 is called Snowy Fawn (you had to buy a certain number of tubes to get this
(Present for 08-2021) **this tube is not for sale**
The other tube is Oh Deer
RD mask 854
Open a 750x750
Flood fill bottom layer with paper5 apply mask from above
115 c/p size this down by 65%
Take the tube oh deer paste it , then pull behind the frame size her down by 29%
Click on top of the frame
124 c/p size this down by 45% pull to the top of your frame
77 c/p size this down by 50% pull to the bottom of the frame
43 c/p size this down by 50% pull to sit on top of snow on right side of the frame
38 c/p pull this to the top of the frame
Take the 2nd tube (winter fawn) c/p size her down by 25% mirror her, then pull to the left edge of the tag
39 c/p size this down by 36% pull to the right edge of snow
AI-Art2 c/p size this down by 21% pull to sit in front of the tubes feet
AI-Art 5 c/p size this down by 20% pull to stand in front of wooden tree
11 c/p size this down by 11%, then pull to sit on left edge of house.
4 c/p size this down by 20% pull to the left edge of the tag
2 c/p size this down by 20% pull to right of E4
7 c/p size this down by 15% pull to stand on left side of the steps, on the house.
8 c/p mirror size this down by 15% pull to stand where it’s nose is in front of the other small deer
AI-Art4 c/p size this one down by 11% pull to sit by the knee of your tube
5 c/p size this down by 11% pull to stand on left edge of the steps
14 c/p size this down by 11% pull to sit by small puppy and kids on left of the tag
Add a new layer to your tag for the copyrights and credit to kit maker, add a saying and you’re done…
Thank you for reading my tutorial
©LadyDragus~2024
Tags for Jill
Kit Match For
Stores I Sell At
Blog Trains for HODG
Forums
Blogs I follow
.gif)
