Jungle Traveler

This tutorial is written in Corel 2021, but any version should work, this is written in hopes you have  working knowledge of Paint Shop Pro or other graphics program… this is written by me, never meant to copy or look like your work…

I am using a PTU kit

By Carita Creationz

Called Jungle Jewels

You can find this

Jungle Jewels

I am using an Exclusive tube

By Alehandra_Vanhek

Called traveler Girl

You can find her

Here Traveler Girl

Open a 750x750

12 c/p size this down by 80%

48 c/p pull behind the archway and leave as it falls on the tag

Click on top layer of your tag

6 c/p size this down by 74% pull to the left edge of stone archway

1 c/p size this down by 30% pull to fly above the giraffe

29 c/p size this down by 25% pull to sit on top right of stone archway

27 c/p size this down by 48% pull to stand in the middle of the archway

41 c/p size this down by 40% pull to stand on right side of the giraffe

40 c/p size this down by 30%pull to the far right side of your tag

Take the tube we are using, c/p size her down by 20% pull to the bottom of the tag

21 c/p size it down by 35% pull to sit by her feet in front of the giraffe

22 c/p size this down by 24% pull to stand on the left side of big leopard

7 c/p size this down by 41% pull to stand on right side of our tube

3 c/p size this down by 25% pull to stand in front of the tube

44 c/p size down by 16% rotate 45° to the right pull the 1^st copy to the middle right of tag, take a 2^nd copy mirror paste in the middle of the left side of your tag

46 c/p size this down by 25% pull to the top middle of your tag

14 cp size this down by 15% rotate 45° to the left bring down to lay over her hand

49 c/p size this down by 19% pull to sit on ground in front of the elephant

Add a new raster layer for the copyrights for kit and tube, make sure you have a valid license to use this person’s artwork, add a saying to the tag and you’re done…

Thank you for reading my tutorial

©LadyDragus~ 2024

Geisha & Sakura

This tutorial is written in Corel 2021, but any version should work, this is written in hopes you have  working knowledge of Paint Shop Pro or other graphics program… this is written by me, never meant to copy or look like your work…

I am using a PTU kit

By Wicked Diabla Designs

Called oriental

Which you can find it

Oriental Wicked Diabla

I am using 2 PTU tubes

By Alehandra_Vanhek

Sakura Branch Tube

Geisha Tube

I am using a FTU template

By Becky P (Simple Expressions)

Templates Becky P

BP_template 211

Open the bundle take out the template we are using

Using Shift+D duplicate it, remove background and copyright layer, upsize the canvas to 700x700

Delete the heats and circles from the template

Click on Frame 1 fill & Frame 2 bg flood fill these with paper 7

Click on black circle flood fill with paper 6

Shape 2 flood fill with paper 10

Shape 1 flood fill with paper 9

Click back on frame1 fill c/p Sukura mirror her size her down by 50% pull so the face is inside of the border crop off any showing out of the tag

Click on frame 2 bg, take Geisha tube size her down by 50% pull so it’s just her face in the far left edge corner of that layer, crop off any showing outside of the border, c/p a 2^nd copy of the face, mirror and pull to sit on the very right inside edge of the border

Click on top layer of your tag

E1 c/p size this down by 30% pull to the bottom middle of the tag

E4 c/p size this down by 30% pull to hang off the bottom of top frame border

Click o circle

E44 c//p size this down by 30% pull to right edge of the circle

E47 c/p size this down by 30% pull to the left of pink flowers

Click back on top layer of the tag

E50 c/p size this down by 22% pull to the upper left edge of the tag

E46 c/p size this down by 15% pull to the bottom left edge of the tag

E42 c/p mirror size this down by 22% pull to lay in front of the house, in middle of the tag

E10 c/p size this down by 22% pull to lean on the steps

Make a new top layer of your tag

Add your credits and copyright information, then add a saying to the tag and you’re done…

Thank you for reading my tutorial

©LadyDragus~ 23

Royal Purple

This tutorial is written in Corel 2021, but any version should work, this is written in hopes you have  working knowledge of Paint Shop Pro or other graphics program… this is written by me, never meant to copy or look like your work…

I am using a PTU kit

By House of Dragus Graphics

Called Royal Purple

You can find it in my stores

House of Dragus Graphics

 Berry Applicious Store

I am using a PTU tube

By Alehandra_Vanhek

Verymany Artists

RD_mask966

Here Rachel Designs

Drop Shadow for this tag (DS)

Vertical 5

Horizontal 3

Opacity 60

Blur 5

Black

Open a 750x750

Frame 172-5 c/p size this down by 69%

37 c/p size this down by 70% add the DS from above

Take the purple colored version of this tube and the flower; paste as a new layer size her down by 40% pull to the bottom of the frame.

23 c/p rotate 45° to the right, then size it down by 25% pull to lean on the right edge of the frame

2 c/p size this down by 40% pull to the left side of the tag

101 c/p size this down by 45% pull to cover up the bottom of the dress on the tube

64 c/p size this down by 40% pull to the lower right of the tag

11 c/p size this down by 30% pull to sit on left edge of the tag

3 c/p size this down by 25% pull to sit in front of white flowers

61 c/p size this down by 15% pull to sit on right edge of other cup with flower

13 c/p size this down by 20% pull to sit on left edge of the dragon

54 c/p mirror size this down by 30% pull so the cat is sitting on the boot

5 c/p size this down by 21% pull to sit in front of cups of flowers

44 c/p size this down by 16% pull to sit on right side of purple rose

33 c/p size this down by 24% pull to sit on right edge of the boot

Click on bottom layer of the tag flood fill with paper 172 (4), then apply mask from above, merge this into one layer….

Click on top most layer of your tag add a new raster layer for the credits and copyrights of the tag , add a saying to the tag and you’re done…

Thank you for reading my tutorial

©LadyDragus~ 2023

  Mystical Scraps Store

 Preview of the Bundle 

Vintage Spring

This tutorial is written in Corel 2021, but any version should work, this is written in hopes you have  working knowledge of Paint Shop Pro or other graphics program… this is written by me, never meant to copy or look like your work…

I am using a PTU kit

By Scraps Dimensions

Called Vintage Spring

You can now find her kits

Here  Mystical Scraps Store

&

Here  DGD~ DigiGraphicsDesigns

I am using an exclusive tube

By Alehandra_Vanhek

Called Bunnies

You can find this tube

Here Rabbits Tube

Rachel 31-4

Here  Rachel's Designs

In this tutorial I am using AI products by DeniseC art

& CCD (Curious Creative Dreams) I will put intals for which folder the elements come from so as not to confuse when they are both numbered the same

DC  & CCD

Open a 750x750

28 c/p size this down by 55%

12 c/p rotate 90° to the right size this down by 31% pull to the upper left corner of the frame

33 c/p size this down by 30% pull this to the upper right top of the frame

2 c/p size this down by 30% pull to the left edge of your tag

DC-E6 c/p size this down by 41% pull to sit in front of flowers

Take the tube we are using c/p size her down by 25% pull to the far right of your tag

DC-E8 c/p size this down by 23% pull to sit in front of the tube

DC-3 c/p size this down by 21% pull to sit by box

DC-E11 c/p size this down by 30% pull to sit on left edge of heart candy box

DC-E4 c/p size this down by 30% pull to sit on right edge of our tube.

CCD-E8 c/p size this down by 25% pull to sit by kitten

16 c/p size this down by 18% pull to sit on the left edge of eggs/house

20 c/p size this down by 24% pull to sit by yellow cupcake
CCD-E6 c/p mirror size this down by 15% pull to sit on the flower on left side of your frame

Click on bottom layer of the tag flood fill with paper 5 apply mask from above, merge into a group layer

29 c/p leave as it falls on the tag

Click on top most layer add a new raster layer for your credits and copyright information, add a saying to the tag and you’re done…

Thank you for reading my tutorial

©LadyDragus~2023

Steampunk Feel

This tutorial is written in Corel 2021, but any version should work, this is written in hopes you have  working knowledge of Paint Shop Pro or other graphics program… this is written by me, never meant to copy or look like your work…

I am using a PTU kit

By Scrap Dimensions  

She has her kits listed

Here Scrap Dimensions

I am using an exclusive tube

From Pic for designs

By Alehandra_Vanhek

Called Lady and Cat

Here Lady and Cat

BBD_2012 SPmask 5

Here Bitzy Beez Designz

Open a 750x750

E25 c/p rotate 90° to the right size it down by 66%

Take the colorized version of the tube we are using, c/p size it down by 23% pull to the left side of the frame

E20 c/p size this down by 35% pull to the far right hand edge of the tag

SD_SF 10 c/p size this down by 30% pull to the bottom right corner of the frame

E3 c/p size this down by 35% pull to the upper right of the frame

SD_SF E1 c/p size this down by 35% pull to sit on right of the cat

SD_SF 12 c/p size this down by 35% pull to sit in front of trunk

E32 c/p size this down by 35% pull to sit on right edge of our tube

E31 c/p size this down by 14% pull to sit on top of trunk

SD_SF 3 c/p size this down by 30% pull to sit in front of the tube

SD_SF 7 c/p size the bear down by 21% pull to sit on left of trunk in front of the cat

SD_SF 5 c/p size this down by 21% pull to sit in between clock and bear
E13 c/p size this down by 31% pull to hang off E20

E12 c/p size this down by 31% pull to sit on top of the clock

14 c/p size this down by 31% pull to sit on top of the right side of your tag

Click on bottom layer of your tag flood fill with

SD-SF Paper3 apply mask from above, merge this into one layer.

Click on top most layer of your tag add a new raster for the copyright and License information , make sure to give the kit maker credit if she requires this, add a saying to the tag and you’re done…

Thank you for reading my tutorial

©LadyDragus~ 2023

Tag for kit maker and mask maker 

Christmas Cheer 

This tutorial is written in Corel 2021, but any version should work, this is written in hopes you have  working knowledge of Paint Shop Pro or other graphics program… this is written by me, never meant to copy or look like your work…

I am using a PTU kit

By Wicked Diabla

Called Christmas Cheer

You can find her kits

Here Christmas Cheer Kit

I am using a PTU tube by Alehandra_Vanhek

Called Christmas Presents

This is a exclusive tube, but you can still buy this at a slightly higher price

 Here  Christmas Presents Tube

WSL-108

Here  Wee Scots lass

You can find the wallpaper I made with this kit and a different tube

Here Christmas Wallpapers 

Open a 750x750

24 c/p size this down by 70% pull to the middle of the tag

E26 c/p pull between the snow, size it down by 55% pull so it is behind the workshop

50 c/p size this down by 55% pull to the right side of the workshop, c/p a 2^nd one pull to the left of the workshop

83 c/p size him down by 33% pull to the left edge of your tag

Take the colorized tube we are using, and the cat and dog, size them all down by 20% pull to the right edge of the tag

12 c/p size this down by 16% pull to sit in front of Santa

3 c/p size this down by 15% pull to sit in front of the tube

57 c/p size this down by 15% pull to sit on left side of wagon

85 c/p size this down by 15% pull so it is flying by the tree

6 c/p size this down by 15% pull to sit on right of the drum

67 c/p size this down by 11% pull to sit on right of the bear

62 c/p size this down by 11% pull to sit on left edge of the drum

60 c/p size this down by 11% pull to stand in front of the drum

16 c/p size this down by 11% pull to sit in front of wagon

78 c/p size this down by 11% pull to sit in front of truck and other red present

76 c/p size this down by 15% pull to sit by the coffee mug on left side of the drum

74 c/p size this down by 75%,  then move one  over the right side of the tag and a 2^nd copy on the left side of the tag

Click on bottom layer of your tag (this is when I size my tags down)

Flood fill bottom layer with paper6 apply mask from above, merge this into one layer…

Click on top layer of your tag add a new raster layer, for the copyrights and credit to the kit maker, make sure you have a valid License to use this person’s artwork…

Add a saying to the tag and you’re done…

Thank you for reading my tutorial

©LadyDragus~2022

Tag for kit maker 

Sinking in Blue

This tutorial is written in Corel 2021, but any version

I am using a PTU kit

By Honored Scraps

The Sinking Night

Mystical Scraps Store

 Taggers Delight

Your Scrap Addiction

Berry Applicious Store

I am using a PTU tube

By Alehandra_Vanhek

You can find this tube

Here Barbara Tube

**Remember you can now buy these tubes at a higher price and they are still exclusive tubes**

Open a 750x750 (size down at the end)

Frame 6 c/p size this down by 66%

Click under the frame

40 c/p this 2 times  then pull the 1^st on  to the upper left and the 2^nd lower right of the frame

34 c/p pull behind the mask pull 1^st copy to the upper right, and then pull the 2^nd to the lower left of the tag

Click on top layer

47 c/p pull so the top end is on the right edge of the frame

1 c/p size this down by 66% pull to the right edge of the frame

Take the colorized version of the tube you want I chose blue with the cat, paste her size her down by 25% pull so she is sitting on the bench

58 c/p pull this to the left edge of the frame

55 c/p size this down by 85% pull to sit in front of branch

10 c/p size this down by 55% pull to the left edge of 2^nd board on sign, duplicate to make brighter, merge them into 1 layer

32 c/p size this down by 26% pull to hang on bottom of the blue flowers

11 c/p rotate 45° to the right size it down by 25% pull to fly on bottom part of blue stone

17 c/p size this down by 55% pull to fly just on the left edge of the tube we are using

2 c/p size this down by 25% pull to sit on bench by the tube

41 c/p pull to the bottom of the tag on the tube

Add a new raster layer for the copyrights, and credit to kit maker, add a saying to the tag and you’re done…

Thank you for reading my tutorial

©LadyDragus~2022

 Tags for Kit maker 

Blissful Autumn

This tutorial is written in Corel 2021, but any version should work, this is written in hopes you have  working knowledge of Paint Shop Pro or other graphics program… this is written by me, never meant to copy or look like your work…

I am using a PTU kit

By Toxic Desirez

Called Blissful Autumn

I got this as part of Mystical Scraps Creative team

You can find this kit

Here Blissful Autumn

I am using an exclusive tube

By Alehandra_Vanhek

Named Camarine

You can find this tube

Here Camarine

**remember you can now buy these at a slighter higher price then regular tubes**

Open a 750x750

Frame 1 c/p size this down by 70%

Tree 3 c/p mirror size this down by 55% pull to the far right edge of your tag

Corn stalk c/p size this down by 30% pull to stand on left side of the tree, take a 2^nd one and paste beside the 1^st

Grass c/p size this down by 56% pull to the bottom of the frame, take a 2^nd copy and mirror pull so it looks like there is a space between the grasses

Take the colorized version of the tube you are using (bear and wolf also) paste her size her down by 18% pull to the left edge of frame, then pull behind the 2^nd copy of grass

House c/p size this down by 45% pull to the far right side of the tag

Mushrooms 1 c/p size this down by 25% pull to sit on left edge of house.

Mushroom 2 c/p size this down by 25% pull to the left edge of the tag

Leaves 2 c/p size this down by 35% pull to lay between the mushrooms on the tag

Pumpkins c/p size this down by 16% pull to sit on left edge of the house.

Deer c/p mirror size these down by 25% pull to stand on right edge of pumpkins

Pumpkin 1 c/p size this down by 19% pull to sit in front of mushrooms on left edge of your tag

Squirrel c/p size him down by 19% pull to sit on right of pumpkin

Scarecrow c/p size this down by 25% pull so he is standing on top of the house

Click on bottom layer of your tag (this is where I size the tag down)

Open paper 11 using your circle tool draw one behind the frame, and then convert it to a raster layer.

Click on top most layer of your tag add a new raster layer for the copyrights and credit to kit maker, add a saying to the tag and you’re done…

Thank you for reading my tutorial

©LadyDragus~ 2022