Tropicos Mermaid

By LadyDragus

This tutorial is written in Corel X5(15) but any version should work. It’s written in hopes you have a working knowledge of Paint Shop Pro, or other graphics program…

It is written by me, out of my own thoughts, never meant to copy or look like others work…

I’m using a PTU kit

By

Pink Paradox Productions

Tropicos Caliente

You can find all of her kits

Here Pink Paradox Productions

I am using a Exclusive tube

From Pics For Design

Here PFD~ Pics For Design

( you will need to merge what layers you want showing colorize the part’s of the tube you want.. I also make a close up, and a smaller version with a height of 645pixels,( normally use 600for the height but that made her too small) make sure your smart size is on… 300DPI, is what I use for all my tags…

I am using a Mask by Rachel’s Designs

MaskSet21_4

You can find all of her mask’s

Here Rachel Designs

Open a 725x725 you can size it down to 700x700 later…

Frame 9 re-size by 55% leave in the middle of your tag…

101 c/p re-size by 70% pull to the bottom edge of your tag…

35 c/p re-size by 35% pull to the far right hand edge of your tag…

133 c/p re-size by 45% pull to the left hand edge of your tag…

67 c/p re-size by 40% pull to the far left hand edge of your sand…

66 c/p re-size by 30% pull to the right hand edge of 67…

36 c/p re-size by 20% pull to the left hand edge of pillows…

3 c/p re-size by 20% pull it sit on the edge of drum…

Take and paste the re-sized version of your tube pull it to make her look like she is sitting in front of drum…

35 c/p re-size by 25% pull to the right of starfish…

25 c/p re-size by 20% pull close to her legs…

22 c/p re-size by 20% pull to the right of limes…

28 c/p re-size by 20% pull to the left of dish’s box…

12 c/p re-size by 20% pull so it looks, like it is flying by her raised hand…

2 c/p re-size by 35% pull to the upper left hand edge of your tag…

1 c/p re-size by 20% pull above 2 …

6 c/p re-size by 20% pull to make him sit on starfish…

Go to bottom layer of your tag flood fill with paper 25 apply mask from above, merge into one layer…

Go back to the upper most top layer of your tag, add your copyright’s and what ever saying you wish to add, make sure to give kit maker her credit…

Thank you

LadyDragus~2016

Tag for mask maker

Weathering the Storm

This tutorial is written in Corel X5(15) but any version should work. It’s written in hopes that you have some working knowledge of Paint Shop Pro, or other graphics program...

This is written by me, out of my thoughts never meant to copy or look like others work…

I am using a PTU Scrapkit

By

Pink Paradox Productions

“Weathering the Storm”

You can find all of her kits in her store

Here

 Pink Paradox Productions

I am using the artwork of

Alex Prihodko

You can find most of his work

Here PFD~Pics For Design

(Always make a smaller version of your tube, with the height 600pixels, use smart size so it does not pixilate the tube)

I am using a FTU mask by Vix

You can find them all on her blog
(mask362) Here Vix PSP

Open a 700x700 size tag…

Frame3 c/p re-size by 50% leave in the middle of your tag…

Take a close up version of your tube crop just her face off, I had to rotate mine 45° to the right to put just her face and top of her knee inside of the frame, them pull back behind the frame…

Add these Xero: Radiance Settings

82 c/p re-size by 55% pull to the far right hand edge of your tag…

139 c/p re-size by 65% pull to the far right hand edge of your tag…

132 c/p rotate 45° to the left re-size by 35%, and then pull to the far left hand edge of your tag…

7 c/p re-size by 15% rotate 45° to the right clean off the chain, to make it look like it is sitting on top of the white flowers…

145 c/p re-size by 40% pull to the middle of white flowers…

77 c/p mirror re-size by 50% pull to the left hand edge of your tag, copy re-sized version mirror it and paste it on the right hand side of your tag, merge them into one layer…

29 c/p re-size by 25% pull to the far tight hand edge of tower…

28 c/p re-size by 25% pull to the right hand edge of E29…

44 c/p re-size by 25% pull to the middle of your tag…

93 c/p re-size by 65% pull to the middle of your tag, you can paste it a few times to make it look like the blocks will sit on grass then pull behind the blocks…

2 c/p mirror re-size by 25% pull to sit on top of blocks in front of tower…

14 c/p re-size by 20% pull to the lower left hand edge of blocks…

10 c/p re-size by 25% pull to the front of E14…

33 c/p re-size by 30% pull to the very far left hand edge of the dog…

3 c/p re-size by 55% pull up to the top of your tag, copy re-sized and pull it to the bottom of your tag, merge into one layer…

9 c/p mirror re-size by 25% pull to the top of tower…

Go to the bottom layer of your tag, flood fill with paper26 apply mask from above, merge into one layer add a sharpen more to the image, and this drop shadow

Vertical 5

Horizontal 3

Opacity 100

Blur 5

Color black

Go back to the top most layer of your tag, add a new raster layer for you’re credit to tube maker and kit maker and what ever saying you want on your tag…

Hot Strawberry Girl

Hello, this tutorial is written in Corel X5(15), but any version should work.

It is written in hopes you have a working knowledge of Paint Shop Pro, or other graphics program…

I am using a PTU kit

By

Pink Paradox Productions

Called

Strawberry Watermelon

You can get all of her kits

Here Pink Paradox Productions

I am using the wicked artwork

Of

Greg Andrews

Rebel Girl 

He sells all of his tubes

Here ADI~Artistic Dreams Imaging

I am using a FTU mask by Dee

http://dangerouslydeliciousdesignz.blogspot.com/

Open a 715x715 size tag, you can re-size it later

Frame 11 c/p re-size by 55% leave in the middle of your tag…

Frames 15 c/p pull behind frame11 re-size by 70% add a sharpen more to the element...

89 c/p re-size by 70% pull to the far right hand edge of frame, mirror and pull to the left side also…

75 c/p re-size by 70% pull to cover the bottom edge of your frame…

The tube I’m using a 900x900 so I re-sized it down by 65% mirrored and pulled to the far right hand edge of your tag…

1 c/p mirror re-size by 30% pull just in front of her feet…

15 c/p mirror re-size by 40% pull to the lower left hand edge of your tag…

87 c/p mirror re-size by 55% pull to the lower left behind the watermelon…

22 c/p re-size by 15% pull to the left of watermelon…

14 c/p re-size by 25% pull to the lower right hand side of tag…

117 c/p rotate 45° to the right re-size by 75%...

120 c/p re-size by 70% pull to the very bottom of your tag…

2 c/p re-size by 30% pull to the upper left hand edge of your tag

Add this drop shadow

Vertical 5

Horizontal 3

Opacity 100

Blur 5

Color black

7 c/p re-size by 30% pull to make it sit on top of watermelon/vine…

52 c/p re-size by 25% pull to the very right hand edge of sack of watermelon

Add the drop shadow from above but make the opacity 60%...

11 c/p re-size by 35% pull to the left hand edge of strawberries…

18 c/p re-size by 15% pull to the right of strawberry drink…

Go to bottom layer paste 16 re-size by 70% pull behind the two frames…

Flood fill bottom layer with paper 11 apply mask of choice..

I used a mask by Dee

Dangerously Delicious Designs Mask DDFO-2

I merged it into on layer, copied and pasted rotate 90° to the right and upsized both layer by 110%...

Thank you for reading/dong my tutorial…

©LadyDragus~2016

Summer Fantasy

This tutorial is written in Corel X5(15) but any version should work. It’s written in hopes you have a working knowledge of Paint shop pro or other graphics program…

This is written by me, and not meant to copy or look like others work…

I am using a PTU kit

By

Pink Paradox Productions

You can find all of her kits in her store

Here PinkParadoxProductions

I am using a PTU tube

By

Misticheskaya

You can find most of her work

Here PFD~ Pics For Design

(there are a few layers make sure you copy and make  smaller version of the tube with the height around 600pixels and make a close up if you want to put her face behind the frame)

I am using a FTU mask

By Angie Tagged Me

(Mask 18_ATM)

Here Angie Tagged Me

Open a 715x715 size tag, you can re-size it later

Frame25 c/p re-size by 60%....

145 c/p mirror re-size by 50% pull to the far right hand edge of frame…

90 c/p re-size by 60% pull to the lower part of your frame…

Take the sized down version of your tube and paste I also re-sized her again by 75% add a sharpen to the tube …

141 c/p re-size by 45% rotate 35° to the left pull to the left hand edge of flowers…

20 c/p re-size by 40% pull just so it shows up some in the flowers…

89 c/p re-size by 60% pull behind your frame…

131 c/p re-size by 50% pull to the far left hand edge of frame…

132 c/p re-size by 30% pull to the left hand edge of tag…

136 c/p re-size by 20% pull to the right of flower…

144 c/p re-size by 25% pull to the lower left hand edge of your tag…

43 c/p re-size by 30% pull to the very far right hand edge of stone this will cover some of her right foot…

40 c/p mirror re-size by 25% pull to the right hand edge of chest…

2 c/p mirror re-size by 25% pull to make him sit by chest, add a sharpen more to the cat…

199 use Shift+D to make a new one, and go into EyeCandy4000 HBNoise use these setting’s;

Paste, re-size by 55% pull to the very top of your tag, copy and paste it on the bottom, merge them into one layer…

9 c/p re-size by 15% pull to sit it on the purple flowers…

7 c/p mirror re-size by 25% pull to the upper left hand edge of tag, by a flower….

Go to the very bottom layer of your tag flood fill with paper29 apply mask from above, or one your choice…

Go back to the upper top layer make a new raster layer and add your credits for your tube and kit since she requires that... Ad what words you want on your tag and you’re done…

Tag for mask maker

Pink Sunshine

This tutorial is written in Croel X5, but any version should work…

It is written by me, out of my own mind, and not meant to look like others work…

I am using a PTU Kit

By
Pink Paradox Productions

You can find all of her kits in her store

Here Pink Paradox Productions

I am using the PTU artwork of

Zlata_M

This tube I got from Pics For Design

Here PFD~Pics For design

Open a 715x715 size tag you can re-size it later…

E15 c/p pull it to the lower part of your tag…

E55 c/p re-size by 55% pull to the very back of your tag…

E110 c/p re-size by 55% pull to the lower left hand edge of umbrella…

E71 c/p re-size by 55% pull to the right hand edge of tree…

E65 c/p re-size by 55% pull to the very back of your tag, down to the bottom layer…

E97 c/p re-size by 55% pull to the far right hand edge of fence…

Take the tube merge her and her drink mirror re-size by 75% pull it down on top of E15

E19 c/p re-size by 35% pull to the left hand edge of your tag…

E29 c/p re-size by 40% pull to the left of tag…

E1 c/p re-size by 35% pull to the very back of the towel…

E16 c/p re-size by 20% pull to the right side of the towel…

E42 c/p re-size by 20% pull close to her hands…

E44 c/p re-size by 20% pull to the left hand edge of drink…

E8 c/p re-size by 20% pull to the left hand edge of drinks…

E11 c/p re-size by 30% pull in front of the flip-flops…

E49 c/p re-size by 20% pull to the right in front of drinks…

E46 c/p re-size by 20% pull to the right of berry….

E40 c/p re-size by 15% pull to the end of citrus fruit…

Got to your bottom layer, open Paper9 re-size it to fit inside of the 715pixel tag, apply a mask of your choice merge into one layer…

Go back to the upper top most layer, add a new raster layer and add your credits and Lic# number credit to the kit maker if she requires it..

Thank you

©LadyDraugs~2016

Tag for the artist Zlata_M

Here is the mask I used

I used a mask BabesDesignMask2 I just found out she closed her site a long time ago, so sorry…

Harem Princess

This tutorial is written in Corel X5(15) but any version should work. It’s written in hopes you have a working knowledge of Paint Shop Pro or other graphics program…

This is written by me, never meant to copy or look like others work…

I am using a PTU Kit by

Pink Paradox Productions

Called

Harem Dancer

You can find all of her kits in her own store

Here Pink Paradox Productions

I am using the PTU artwork

 Of

Zlata_M

I got this tube from

Pics for design

Here PFD~Pics For Design

I am using a FTU mask by

Rachels Designs (MaskSet11_1)

Here Rachel's Designs

I am using the Font

ALS Script you can find this at most FTU font sites…

Open a 715x715 size tag, you can re-size later

Frame 3 c/p re-size by 70%

Frame 6 re-size by 65% pull behind Frame3 clean off any inside of frame6 merge into one layer..

Take the tube layer you wish to use, make a close up of the tube I used it down to her middle knee, so she is still all inside of the frame…

131 c/p re-size by 65% pull to the lower right c/p mirror pull to the lower left merge into on layer…

135 c/p re-size by 45% pull to the far left hand edge of your tag…

138 c/p mirror rotate 45° to the right pull it even with the right hand edge of frames…

54 c/p pull to the far left hand edge of your tag…

4 c/p mirror re-size by 455 pull to the far right hand edge of the tag…

42 c/p re-size by 35% pull to the far right hand edge of your tag…

6 c/p mirror re-size by 25% pull to make him look like he is coming out of the bottle, merge him onto the bottle layer…

20 c/p re-size by 30% pull to the left of genie bottle…

81 c/p re-size by 15% pull to the far left hand edge of your tag…

10 c/p mirror re-size by 25% pull to sit him on top of E81…

21 c/p re-size by 20% pull to the left of pineapple…

40 c/p re-size by 25% pull to the far right hand edge of tag, in front of other bottle…

126 c/p re-size by 15% pull to the left of glass…

119 c/p re-size by 15% pull over under the bed/tent….

24 c/p re-size by 25% pull to cover up the bottom of pineapple…

15 c/p mirror re-size by 20% pull to the very top left hand edge of your tag…

Go to the very bottom layer of your tag flood fill with paper12 merge into one layer and upsize by 105, add a sharpen more and a drop shadow of your choice…

Thank you for doing/reading my tutorial

By LadyDragus©2016

And a tag for the Mask maker

Rachel

Spring Day Dream

By LadyDragus

This tutorial is written in Corel X5, but any version should work. It’s written in hopes you have a working knowledge of Paint Shop Pro, or other graphic’s program…

It is written by me, never meant to copy or look like others work…

I am using a PTU Kit

By

Pink Paradox Productions

Called Spring Day Dream

You can find all of Carries kits
In her own store
Here  Pink Paradox Productions

I am using the PTU artwork

Of Nocturne

You can find her work

Here PFD~Pics For Design

I am using a FTU mask by

Rachel’s Designs

Here Rachel Designs

I am using the Font

Alpha Thin, which can be found at most FTU font sites…

Open a 715x715 size tag you can re-size later

Frame3 c/p re-size by 50% leave in the middle of your tag…

67 c/p re-size by 70% pull to the middle bottom of the frame…

100 c/p re-size by 65% pull to the far right hand edge of frame…

89 c/p re-size by 40% pull to the far right hand edge of your tag…

65 c/p re-size by 65% pull even with the top of the leaves…

1 c/p re-size by 20% pull to the bottom part of flowers…

107 c/p re-size by 45% pull to the far right side of tag, (your tube will cover most of this later)

91 c/p re-size by 30% pull to the upper left hand edge of your tag add this drop shadow

Vertical 5

Horizontal 3

Opacity 50

Blur 5

12 c/p re-size by 30% pull to the left hand edge of tag, then re-size by 70% to make just a bit smaller(wont get pixilated this way)…

Take your tube re-size to fit tag; I did it by 35%...

81 c/p re-size by 8%(Small) rotate 90° to the right pull it up to look like it is sitting in her hair that is swept over her face….

20 c/p re-size by 25% pull to the lower right hand edge of tag, just over her feet…

15 c/p re-size by 25% pull to the right hand edge of cup…

121 c/p re-size by 55% pull to the lower right edge of your tag…

10 c/p re-size by 35% pull to the upper left hand edge of your tag…

63 c/p re-size by 55% add a sharpen more to the clouds pull to the upper right hand edge of your tag, c/p mirror and pull above the balloon…

11 c/p re-size by 25% pull to sit it on the cup…

Go to the bottom layer flood fill with paper 35 apply a square mask of your choice or the one I used, merge into on layer add a sharpen more to the layer
Thank you for reading my tutorial

Angelina Steampunk 

This tutorial is written in Corel X5, but any version should work. It’s written in hopes you have a working knowledge of Paint Shop Pro, or other graphics program…

This is tutorial is written by me, out of my own mind, never meant to look like others work…

I am using a PTU kit

By

Pink Paradox Productions

Called Steampunk Chocolat

You can get all of her kits

Here Pink Paradox Productions Store 

I am using the lovely artwork of

Fiodorova Maria

You can find this artist works

Here PFD~Pics For Design

I am using a FTU Steampunk mask

By Babs Bitzy Designz (BBD_2012SMask3)

Here Bitzy Beez Designz

Font SpeedballNo3

Fount is found at most FTU font sites.

Open a 715x715 size tag you can re-size later

Frame 13 c/p re-size by 50%

Frame 12 c/p re-size by 45% merge into one layer, for a solid frame…

70 c/p re-size by 45% pull to the left hand edge of frames…

Take the layers of the tube you want, there are many colors I chose her brown gown and brown hat, and made my merged copy 600pixels on height (use smart size) paste her and pull her even with the bottom of the frame…

63 c/p re-size by 45% pull to cover the bottom edge of her legs…

106 c/p re-size by 55% pull to the far left hand edge of your tag, 98 will cover most of the inside of the element..

98 c/p re-size by25% pull to the lower left hand edge of tag…

62 c/p re-size by 20% pull to the lower left hand edge of tag…

145 c/p re-size by 35% pull to the right of books…

73 c/p mirror re-size by 35% pull to the far right hand edge of your tag…

126 c/p re-size by 20% pull to the left of standbook…

35 c/p re-size by 20% pull to the right of flower…

10 c/p re-size by 405 pull to sit on top of gears on left hand edge of your tag…

13 c/p re-size by 25% pull to the right of cocobeans…

16 c/p re-size by 20% pull to the right of hot coco…

15 c/p mirror re-size by 20% pull over the brown rose…

23 c/p re-size by 20% pull to the right of cupcake…

34 c/p re-size by 20% pull to the far left hand edge of cocobeans…

Go to bottom layer flood fill with paper21 apply mask from above, or one of your own, merge into one layer add a sharpen more to the layer…

Go back to top most layer, and add a new raster layer, and put your copyright for artist and kit maker since she does require it..

Add a name to the tag and your done…

Thank you for reading/doing my tutorial…

©LadyDragus~2016~

Kit for mask maker

Romance

This tutorial is written Corel X5 (15), but any version should work, it’s written in hopes you have a working knowledge of Paint Shop Pro or other graphics program…

It is written by me out of my own thoughts never meant to copy or looks like yours…

I am using a PTU kit by

Pink Paradox Productions called

Princess Romance

You can get all of her kits in her store

Here Pink Paradox Productions Store

I am using a PTU Tube by

Alex Prihodko

You can get this tube

Here PFD~ Pics For Design ~

This tube can be colorized I did to match 2 of the colors in the kit…

Open a 715x715 size tag you can re-size it later

Frame 16 c/p re-size by 55% leave in the middle of the tag…

10 c/p re-size by 35% pull to the upper left hand edge of frame…

126 c/p re-size by 70% pull to the bottom of your frame, copy paste again to give more green to sit on…

161 c/p re-size by 50% pull to the lower right hand edge of your tag…

81 c/p re-size by 45% pull to the far right of flowers…

97 c/p re-size by 30% pull to the left hand edge of tower…

155 c/p re-size by 55% pull to the lower left hand edge of the tag…

76 c/p re-size by 25% pull to the right hand edge covering the bottom of the flower stems…

96 c/p re-size by 35% pull to the far right of ball…

Take your tube re-size her so she is 600pixel in width; make sure you have on Smart size, so it does not pixilate the image…

9 c/p re-size by 30% pull to the feet…

75 c/p mirror re-size by 25% pull to the far left hand edge of your tag…

6 c/p pull to make him sit on chest re-size by 25%...

3 c/p re-size by 50% pull to the bottom edge of tube…

16 c/p re-size by 30% add this drop shadow

Vertical 5

Horizontal 3

Opacity 75

Blur 5

Color Black

**this is the drop shadow I will use on any other element in the tutorial**…

15 c/p re-size by 15% add drop shadow from above, and sharpen to the element…

19 c/p re-size by 25% pull to the far left hand edge by box of jewelry…

Go to bottom edge of your tag paste paper27 re-size the whole paper by 60% clean off any of the paper outside of the frame make it show just the inside of the “walkway”

81 c/p pull behind paper, re-size by 60% mirror pull to the lower left hand edge of tag, then copy paste flip vertical, mirror pull to the upper right hand edge of tag…

Go to top most layer of your tag paste 189 re-size by 60% pull to the far right then copy mirror pull to the far left..

Make a whole new raster layer and add your copyright and credit for kit maker since she does require it on tags… Add a name and your done..

Thank you

LadyDragus ©2016