Blue Christmas

This tutorial is written by, me out of my own thouth’s never meant to copy or look like your work… It’s written in hopes you have a working knowledge of paint Shop Pro Corel X5, or other graphics program…

I am using a PTU

Kit by

Designz by Shelly

You can find all the stores she sells

In here Designz By Shelly

I am using the PTU artwork

Of Kajenna (snowmaiden)

She sells all of her artwork

Here ~PFD~ Pics for Design

I am using a FTU Mask 

By Trese Tags and Tuts 0055

Here Trese Tags and Tuts

Open a 725x725 size tag, you can re-size later

Pick the colors of the tube you wish to use, merge into one layer copy and paste as a new image transfer the copyright so you can close the original tube…(make one with a height of 600pixels…)

117 c/p re-size by 65% leave in the middle of your tag…

13 c/p pull behind present, re-size by 65% pull down to the bottom edge of your frame…

47 c/p re-size by 25% pull to the top edge of your frame…

55 c/p re-size by 25% pull to the top edge of angel ornament…

12 c/p re-size by 50% pull to the lower left hand edge of your tag…

Put the sized down version of your tube sitting on present…

9 c/p re-size by 15% pull to make it look like she is holding the ball…

8 c/p re-size by 40% pull to the middle of your tag…

22 c/p re-size by 35% pull to the middle of blue boxes

74 c/p pull to the upper right hand corner of your frame…

1 c/p re-size by 35% pull to sit in front of your tube…

78 c/p re-size by 25% pull to the left of blue box’s….

4 c/p re-size by 25% pull to the lower right hand edge of your tag…

24 c/p re-size by 15% pull to the right of glass…

11 c/p re-size by 15% pull in front of blue rose…

Go to the bottom layer of your tag flood fill with paper20 apply mask from above, or one you like better…

Go to top most layer of your tag add a new raster layer add our copyright layer and give credit for kit maker if she requires it…

Thank you for reading my tutotrial 

©LadyDragus~ Dec -2016

Tag for kit maker and mask maker