Magic Mermaid-AV

This tutorial is written in Corel 2021, but any version should work, this is written in hopes you have  working knowledge of Paint Shop Pro or other graphics program… this is written by me, never meant to copy or look like your work…

I am using the PTU artwork of

Alehandra Vanhek

You can find her tubes

Here Alehandra Vanhek

 I am also using a matching kit

By Rieneke Designs

Of the same name

You can find it

Here  Magic Mermaid Rieneke Designs

Rachel Mask 10-3

Here Rachel Designs (WordPress)

Open a 750x750 size tag

E62 c/p size this down by 75%

E43 c/p  then pull to the bottom of the frame

E25 c/p size the castle down by 68% pull to the middle of sand bar

E30 c/p size this down by 65% pull this to the right edge of the sand/frame

E46 c/p size this plant down by 45% pull to sit in front of the other plant

E65 c/p size this down by 35% pull to the lower right bottom of frame

E6 c/p size this down by 50% pull to the left edge of the tag

Take the colorized version of the tube you want to use, c/p size her down by 30% pull her to sit on top of the barrel

E64 c/p size this down by 50% pull to sit on right edge of the tube

E49 c/p size this down by 30% pull to the left edge of the sand

E3 c/p size this down by 30% pull to sit on right edge of E49

E42 c/p size this down by 35% pull to sit on left edge of the tag

E15 c/p size this down by 22% pull to sit on right edge of black

E56 c/p mirror size this down by 35% pull to sit in front of the tubes tale

E14 c/p mirror size this down by 40% pull to sit in front of window in the barrel

E69 c/p size this down by 19% pull to sit just under the shell pulled by seahorse

Click on bottom layer of your tag flood fill with paper 8 apply mask from above, add a sharpen more to the merged layer…

Click on top most layer of your tag add a new raster layer for the credit to artist and kit maker, add a saying to the tag and you’re done…

Thank you for reading my tutorial

©LadyDragus~ June 2022