Perfect Tenderness

This tutorial is written in Corel X5, but any version should work, this is written in hopes you have working knowledge of Paint Shop Pro, or other graphics program..

This is written by me never meant to copy or look like others…

I am using a PTU kit

By Gimptastic Scraps

She only sells at

Creative Design outlet now

Here CDO~Gimptastic Scraps

I am using the stunning artwork of Ketka

This tube is a FTU tube, but you need a PFD Lic# to use it

You can find many tubes

Here Ketka PFD

I am using a FTU template

By Leah

#52

You can find all of there goodies

Here Amy and Leah "Gimptastic Scraps"

I upsized the canvas to 715x715 shift+D duplicate close the original template…

Remove credit layer, then delete the white on the background layer…

Words 1 colorize to blue, then add a blue gradient glow, and this drop shadow

Vertical 5

Horizontal 2

Opacity 75

Blur 5

Color black

Merge the 2^nd set of words into one layer add the same drop shadow hide the layers…

Click on the Square layer flood fill with paper 2

Rect 3 flood fill with paper 9

E38 c/p pull behind the frame clean off any inside just let the words show on the outside left of your frame, rotate 15° to the right then re-size by 75%…

 Click on the raster frame then add a blue gradient glow and drop shadow from above

Rectangle 2 flood fill with paper 10

Rect 1 flood fill with paper 1

Circle flood fill with paper 6

Click on Rect1 open Frame 3 c/p re-size by 70% pull behind the circle, you will need to move them both in a little on the tag so it does not go off the side of the tag…

E7 c/p re-size by 70% pull to the bottom edge of the frame…

Take your tube crop off just below her waist, c/p mirror re-size by 60% pull to sit on the bottom edge of the circle…

E33 c/p pull to sit on bottom edge of your tube re-size by 75%

E10 c/p re-size by 25% pull to sit on top of her hand like she is holding it…

E36 c/p re-size by 60% pull to the edge of blue ribbon…

E39 c/p re-size by 50% pull to the left of the cat

E35 c/p re-size by 50% pull to the far right hand edge of your tag…

E26 c/p re-size by 50% pull to the left of radio…

E8 c/p  re-size by 50% pull to the left of the cat…

E60 c/p re-size by 50% pull to the left of birdcage…

Unhide your words…

E13 c/p re-size by 15% pull to the front of radio…

E44 c/p re-size by 65% pull to the left of camera…

Add a new raster layer for your coyright and credit to kit maker and what ever saying you wish to use… Remember this is a FTU tube but you have to have a lic to use it…

Thank you for reading my tutorial

©LadyDragus ~ March 2017

Tag for Amy and Leah

Dragon Love

This tutorial is written in Corel X5, but any version should work, it’s written in hopes you have a working knowledge o Paint Shop Pro, or other graphics program… It’s written by me, never meant to look like your work…

I am using an

Ispired by Kit

By Gimptastic Scraps

IB-Enamorte 6-1

This can only be found

Here Gimptastic Scraps

I am also using a PTU

Tube

By Molly Harrison

I got this tube

Here CDO Molly Harrison CDO

I am using a FTU template by

Leah of Gimptastic Scraps

Here ( 28) Gimptastic link Templates

I upsized the canvas to 700x700

Shift+D then close the original temp

Delete the white in the Bg layer

Rect layer flood fill with paper6

Circle 5 &Circle 6 flood fill with paper 4

Circle3&4 flood fill with paper5

Circle 2 flood fill with paper 2

Circle 1 flood fill with paper 3

E20 c/p flip vertical pull to the top of your tag…

E6 c/p re-size by 40% pull to the far left make it look like it is hanging off the branch…

Click on Circle 2 open E21 rotate 45° to the right and pull it behind the circle, to cover up most of the smaller ones on the right side of your tag...

Take the tube with wings, paste and re-size by 80% pull to the bottom of the circles…

E12 c/p pull behind the tube re-size by 75% c/p mirror put on top of other layer merge into one raster layer…

Click back on tube

E7 c/p re-size by 45% pull to the left of your tube…

E8 c/p re-size by 35% pull to the right of string…

E17 c/p rotate 45° to the right, re-size by 60% pull to the rigt of her knee…

E3 c/p re-size by 40% pull to sit on the bottom of heart bloom…

E9 c/p re-size by 55% pull to lean on the string…

Make a new raster layer for your copyright and credit for kit maker…

Thank you for reading my tutorial

©LadyDragus January 2017

Tag for kit maker and template maker

Beauty is only skin deep.

This tutorial was written in Corel X5, but any version should work. It is also written in hopes you have a working knowledge of Paint Shop Pro. It is also written out of my own thoughts and mind, never meant to look like others work.

I am using a PTU kit

By

Black Widow’s Creations

She sells at many stores

You can find all of them listed on her blog

Here Black Widow Creationz

I am using a PTU tuby

By

Di_Halim

This tube can be bought at

Pics for design

Here PFD~Pics For Design

I am using a FTU Template

By Leah of Gimptastic Scraps (33)

You can find all of there goodies

Here  GImptastic Scraps Blog

I am using the Font Allegro it’s either window’s font I know you can get it on any FTU font site online…

I upped the canvas size to 700x700 to have more room to work with the template..

Delete background layer…

Word art colorize to a red from the kit, darker works best

Add a gradient glow of dark red to word art back, and then merge into one layer…

Rec 2 flood fill with paper4

Oval flood fill with paper15

Frame 1 flood fill with paper15 add the same gradient glow from the word art…

Square1&3 flood fill with paper3

Square 2 flood fill with paper11

Using your magic wand tool, select the “in the eye of the” words add a white gradient glow and add this drop shadow

Vertical 5

Horizontal 3

Opacity 100

Blur 5

Black color

Take the close up of your tube, the one you make copy her on top of Square 1 re-size by 80% and crop off any of the tube on the bottom that does not match the oval…

E39 c/p re-size by 45% pull to the left hand edge of your tag…

15 c/p rotate 75° to the left flip vertical pull to just behind the word art layers…

18 c/p re-size by 30% pull to the bottom edge of Beholder on the left hand side…

Click on your tube

7 c/p re-size by 65%, pull down where the leaves is behind the other roses on tag…

17 c/p re-size by 65% pull to the far right hand edge of your tag…

25 c/p re-size by 65% pull to the right hand edge of your tag, copy mirror negative image the ribbon and pull to the far left hand edge of tag…

Go to top most layer

14 c/p re-size by 65% pull to the far left hand side of your tag…

15 c/p re-size by 45% pull to the lower left hand edge of your tag…

10 c/p re-size by 55% add the drop shadow from above, and pull to the bottom left hand edge of your tag…

37 c/p re-size by 45% pull to the B in Beholder…

1 c/p pull to the bottom of your tag…

5 c/p re-size by 40% pull to the L in the Love Element…

Make a new raster layer and add your credit for kit maker and artist make sure you have a Valid Lic# for this tube…

Thank you for reading or doing my tutorial, any results would be nice…

©LadyDragus (as I wrote the tutorial it mine)

Tags for kit maker store owner and template maker

Fangtoxic 

This tutorial is written in Corel X5, but any version should work, it’s written in hopes you have a working knowledge of Paint Shop Pro, or other graphics program…

It is written out of my own thoughts and mind, not meant to copy or look like others work, or tags.

I am using a PTU Kit

By

Toxic Desirez,

 I got to work with this kit

As I’m part of her personal Creative Team

You can find all of her kit and stores listed on her blog

Here  Toxic Desirez blog

I am using the PTU artwork of

Dominic Marco

I got this tube when he was with CILM, but that store is no longer open

You can find most of his artwork on his website

Here  Dominic Marco blog

I am using a FTU Template by

Leah of Gimptastic Scrap team

You can find her templates and all the other goodies they have on there blog

Here Amy&Leah

I opened the template and up-sized the canvas to 700x700

You will need to promote the background layer so it all goes away and does not leave a black background…

Raster 11&12 flood fill with paper14

Raster 10 flood fill with paper20

9&8 flood fill with paper11

6&7 flood fill with paper7

Raster 5 flood fill with paper5

Delete F-4 and raster4

F-3,F-1&F-2,add a gradient glow the color red from the kit or some color from your tube…

Take the opacity on words-3 and make it 50 instead of 20then add the same gradient glow you used on the frames…

Words2 back colorize to red, then merge the words2 onto the colorized layer and add the same gradient glow you used above add this drop shadow

Vertical 5

Horizontal 3

Opacity 100

Blur 5

Color black

Words1 colorize red, and then add the red glow, add the drop shadow from above…

Raster 3&2 flood fill with paper1

Raster 1 flood fill with paper2

Frame1 c/p re-size by 40% add the drop shadow from above pull it to cover raster1…

Take a face of one of the tubes your going to use I used the devil tube of his, crop it out, and paste it behind the frame, add what ever sharpen you want to make it stand out more…

Click on F-3 open web paste it and re-size by 70% pull up to the upper right hand edge of the frame, then copy that flip vertical and pull to the bottom edge of your tag…

Coffin c/p re-size by 35% pull to the bottom left behind the finger words…

F2 paste Eye’s and bone string re-size by 50% pull to the far left hand side of your tag…

Click back on the frame c/p bow2 rotate 45° to the right and re-size by 30, add a sharpen more and pull it to the upper right hand corner of the frame…

Cross c/p re-size by 25% pull to the middle of bow2, add a sharpen more to the element…

Click on the top most layer of your tag

Bat c/p mirror re-size by 50% pull so it looks like he is sitting on the middle top of the web on the right hand side of the tag…

Click on raster 4 paste flame rotate 45° to the left and re-size by 55% pull it to show up behind the circle’s copy this paste mirror and pull it up to the left hand edge of circles, merge the layers into one…

Candy c/p 2 times pull one behind the circle on the left and the 2^nd one on the right circle…

Go back up to the layer with the bat paste Kitty and skull re-size by 30% pull it to the bottom left hand edge of tag, in front of coffin…

Heart & butterfly c/p re-size by 25% pull to the upper corner of licking word add the drop shadow from above…

Click on the layer with the coffin paste your tube, I had to mirror mine and re-size her by 75% so she looks like she is leaning on the coffin….

Rose c/p re-size by 25% pull it down to where it look’s like she is holding it in her hand…

Go to the very bottom of your tag paste splatter once up on the left hand top of tag and then again on the right hand top of tag, merge the layers into one…

Go to the very top layer of your tag, and then make a new raster layer for your credit for tube and kit if it is required, then add what ever saying you wish to us on the tag…

Zombie Love

This tutorial is written in Corel X5, but any version should work.

It’s out of my own mind and thoughts. Not meant to copy or look like yours.

I am using an Exclusive Tube for

Smiley Creations Store it is part of the

Happy Zombie Valentine Collab

The Collab is $5 and it comes with the tube by (a close up is also included in the bundle)

Freya Langford-Sidebottom 

It also includes 2 kits 

4 CU packs so you and the best part is; that it's only $5... 

You can find the collab at the store

Here Smiley's Creations Store

I am also using at FTU Template by Amy&Leah of Gimptastic Scraps

It’s Temp 3

You can find this any many more on there blog

Here Amy and Leah Gimptastic Scraps

Font Zombified can be found anywhere free fonts are found.

I am using a VixMask Vixmask_307

You can find all her goodies on her blog

Here Vix PSP

I am taking the temp and using an up-size of canvas size of

700x700 remove the background…

Take the zombie layer of your tube and paste it behind thin rect and re-size it by 65%

Delete thin rectangle frame, and thin frame back,

Thin Rectangle up-size by 103 so it fits behind the film paper better, add a gradient glow, the color of pink off her dress, I used the lowest setting’s on the gradient glow use what ever you want…

Rectangle 1 flood fill with paper3

Rectangle 2 flood fill with paper1

Large rectangle frame  paste splatter and pull to sit behind the two other frames, then on same layer paste again but pull it to the bottom of the raster

Take a head shot of the “normal” tube paste her behind the film strip and re-size to fit behind, it will vary on what size of the head you crop out of the tube, I’m putting one on each end of the film strip, clean off any of that is above or below the strip, just not inside of it…

Go back to the top most layer;

Bow2 c/p re-size by 50% pull to the upper left hand edge of rectangle by her shoulder on the outside

Doodle c/p re-size by 40% pull to the middle of bow2 add this drop shadow

Vertical 5

Horizontal 3

Opacity 100

Blur 5

Brad c/p re-size by 60% pull to the middle of the film strip…

Zombie Noms c/p re-size by 35% pull to the right hand side of brad…

Cuppy1 c/p re-size by 30% pull to the left of the zombie noms…

Eyeball c/p re-size by 30% pull in between cuppy and noms…

Finger c/p re-size by 30% pull to make it look like it is pointing at the eyeball…

Butterfly 2 rotate 45° to the left re-size by 45% pull to the upper right hand edge of your tag…

Go down to the background layer re-move the white and flood fill with Paper11 apply mask from above merge into one group layer…

Go back up to the top most layer and make a new raster

To add your copyright and LIC# and other credits as TOU require.

Make sure you have a LIC# to use this artwork

©LadyDragus~2015

Tag for artist and mask maker and the two template ladies