Witch 3

This tutorial is written in Corel 2021, but any version should work, this is written in hopes you have  working knowledge of Paint Shop Pro or other graphics program… this is written by me, never meant to copy or look like your work…

I am using a PTU kit

By Wicked Diabla

Called Witch 3

You can find it in her store

Witch 3

I am using a Pre-Paid tube

By Misticheskaya

Called Darra (you have had to pay into the project to get this tube)

You can find all of her tubes

Misticheskaya Tubes

Horseplay’s Mask 30

Here Masks

Open a 750x750

78 c/p size this down by 60%

34 c/p size this down by 50% pull to the right edge of your frame

55 c/p mirror size this down by 45% pull to the left edge of the frame

25 c/p size this down by 60% paste this 4 times to make it look like a floor of blue leaves

41 c/p size this down by 28% pull to sit on left edge of the frame

19 c/p size this down by 21% pull to sit in front of pumpkin with hands

Take the colorized tube (blue) paste her size her own by 25%

6 c/p size this down by 35% pull to sit by her feet

32 c/p size this down by 13% pull to sit by cauldron in the tube

22 c/p size this down by 13% pull to sit on left edge of the cat

30 c/p size the spider down by 13% pull to sit on top left rose on your tag

71 c/p size this down by 13% pull to sit on right of the cat

70 c/p size this down by 13% rotate 45° to the left pull to sit on top of the brim of her hat add a sharpen more to the element

67 c/p size this down by 13% pull to sit in front of the black cat

Click on bottom layer of your tag flood fill with paper 5 apply the mask from above, merge into one layer size it down by 90%

Click on top most layer of your tag

Add a new layer for the copyrights and credit to kit maker

Thank you for reading my tutorial

©LadyDragus~ 2023

 Tags for Kit maker and mask maker 

Gothic Soul

This tutorial is written in Corel 2021, but any version should work, this is written in hopes you have  working knowledge of Paint Shop Pro or other graphics program… this is written by me, never meant to copy or look like your work…

I am using a PTU kit

By Wicked Diabla

Called Gothic Soul

You can find her kits

Here Gothic Soul Kit

I am using a PTU tube

By Katharine (exclusive tube)

(layer Girl 3)

Here  Girl With Charms

Rachel 31-4

Rachel Designs WordPress

Open a 750x750

15 c/p size this down by 65% leave as it falls on the tag

11 c/p size this down by 56% pull to the top of the frame

30 c/p size these down by 56% pull to the middle of the frame

3 c/p size this down by 30% pull to the left edge of your tag

Take the tube c/p size her down by 29% then pull her to the lower right edge of your tag

31 c/p size this down by 24% pull to sit by her hand on the ground

48 c/p size this down by 20% pull to sit in the top of your tag

4 c/p size this down by 16% pull to the left side of the tag

57 c/p size this down by 16% pull to sit on left edge of goblet

13 c/p size this down by 13% pull to sit on left of kitten

33 c/p size this down by 17% pull to sit in front of kitten

43 c/p size this down by 13% pull to sit inside of the bracelet

38 c/p mirror size this down by 13% pull to sit on the right edge of her hat

9 c/p size this down by 13% pull to sit by her feet on left side of the tag  

Click on bottom layer of your tag open paper 3 flood fill that layer, apply the mask from above, merge into one layer

Click on top most layer of your tag add a new layer for the copyrights and credit for artist add a saying to the tag and you’re done…

Thank you for reading my tutorial

©LadyDragus~2023

Geisha & Sakura

This tutorial is written in Corel 2021, but any version should work, this is written in hopes you have  working knowledge of Paint Shop Pro or other graphics program… this is written by me, never meant to copy or look like your work…

I am using a PTU kit

By Wicked Diabla Designs

Called oriental

Which you can find it

Oriental Wicked Diabla

I am using 2 PTU tubes

By Alehandra_Vanhek

Sakura Branch Tube

Geisha Tube

I am using a FTU template

By Becky P (Simple Expressions)

Templates Becky P

BP_template 211

Open the bundle take out the template we are using

Using Shift+D duplicate it, remove background and copyright layer, upsize the canvas to 700x700

Delete the heats and circles from the template

Click on Frame 1 fill & Frame 2 bg flood fill these with paper 7

Click on black circle flood fill with paper 6

Shape 2 flood fill with paper 10

Shape 1 flood fill with paper 9

Click back on frame1 fill c/p Sukura mirror her size her down by 50% pull so the face is inside of the border crop off any showing out of the tag

Click on frame 2 bg, take Geisha tube size her down by 50% pull so it’s just her face in the far left edge corner of that layer, crop off any showing outside of the border, c/p a 2^nd copy of the face, mirror and pull to sit on the very right inside edge of the border

Click on top layer of your tag

E1 c/p size this down by 30% pull to the bottom middle of the tag

E4 c/p size this down by 30% pull to hang off the bottom of top frame border

Click o circle

E44 c//p size this down by 30% pull to right edge of the circle

E47 c/p size this down by 30% pull to the left of pink flowers

Click back on top layer of the tag

E50 c/p size this down by 22% pull to the upper left edge of the tag

E46 c/p size this down by 15% pull to the bottom left edge of the tag

E42 c/p mirror size this down by 22% pull to lay in front of the house, in middle of the tag

E10 c/p size this down by 22% pull to lean on the steps

Make a new top layer of your tag

Add your credits and copyright information, then add a saying to the tag and you’re done…

Thank you for reading my tutorial

©LadyDragus~ 23

Egypt Beauties 

This tutorial is written in Corel 2021, but any version should work, this is written in hopes you have  working knowledge of Paint Shop Pro or other graphics program… this is written by me, never meant to copy or look like your work…

I am using a PTU kit

By Wicked Diabla

Called Egypt

You can find this in her store

HereEgypt Kit

I am also using the tube that is included with the kit

By Ellen Fox (you must have a WDD Lic to use this tube)

Open a 750x750

22 c/p size this down by 55%

54 c/p size this down by 35% pull to the left edge of the frame

8 c/p size this down by 19% pull to the right edge of the frame

Take the tube we are using paste her as a new layer size her down by 25% pull to the middle of your tag

2 c/p size this down by 20% pull to sit in front of plant on left side of the tag

25 c/p mirror size him down by 25% pull to the far right edge of the tag

28 c/p mirror size the bird down by 13% pull to sit on the staff on the tube

1 c/p size this down by 13% pull to sit in front of the cat statue

5 c/p size this down by 13% pull to sit on the right of the lion statue

49 c/p size this down by 15% pull to sit on the floor in front of the tube

30 c/p size this down by 35% pull to stand on the right edge of the golden pyramid

23 c/p size this down by 22% pull to sit in front of broken pots

33 c/p size this down by 10% pull to the far left edge of the tag

Click on bottom layer of your tag

13 c/p size this down by 55% then clean off any showing outside of the frame

Click on top most layer of the tag add a new raster layer for the credits, add a saying to the tag and you’re done…

Thank you for reading my tutorial

©LadyDragus~2023

Tag for kit maker 

Medusa

This tutorial is written in Corel 2021, but any version should work, this is written in hopes you have  working knowledge of Paint Shop Pro or other graphics program… this is written by me, never meant to copy or look like your work…

I am using a PTU kit

By Wicked Diabla Designs

Called Medusa

She sells in her store

Here Medusa

 I am also using the tube that comes with the kit, so make sure you have a valid license for Wicked Diabla Designs Store

I’m using a FTU mask by Simone

Mask 0350 Simone Masks

Open a 750x750 size tag (you can size down at the end)

12 c/p size this down by 55

Take the tube paste her size her down by 29% duplicate e12 put over the tube, clean off any that is over her face but make her hand look like she is leaning on the right inside of the rock formation

25 c/p size this down by 39% pull to the inside left of rocks

40 c/p size this down by 12% pull to the bottom left of the rocks

24 c/p size this down by 30% pull so this is floating above the tube

35 c/p size this down by 18% pull to float over rocks on left edge

60 c/p size this down by 18% pull to sit on top right of the rocks

16 c/p mirror size this down by 15% pull to the upper right by blue rocks

10 c/p size this down by 15% pull to sit on small shelf on left on the rocks

22 c/p size this down by 21% pull to the far left of the tag

36 c/p size this down by 24% pull to sit on right side of tall green plant

46 c/p size this down by 16% pull to sit in front of purple plant

44 c/p mirror size this down by 14% pull to the far right edge of the rocks

49 c/p size this down by 12% pull to sit by open shell

2 c/p size this down by 12% pull to sit in front of harp

48 c/p size this down by 12% pull to the far right edge of the rocks

Click on bottom layer of your tag flood fill with paper 7 apply mask from above, merge into one layer then size it down by 85%

Click on top most layer of your tag add a new raster layer for the copyrights for tube and kit maker, add a saying to the tag and you’re done…

Thank you for reading my tutorial

©LadyDragus~ 2023

Tags for kit maker, artist and mask maker 

Treasure Island

This tutorial is written in Corel 2021, but any version should work, this is written in hopes you have  working knowledge of Paint Shop Pro or other graphics program… this is written by me, never meant to copy or look like your work…

I am using a PTU kit

By Wicked Diabla

Called Treasure Island

You can find this kit

Here Treasure Island

I am using a PTU tube

By Verymany

Called Pirate

You can find her tubes

Here Verymany Tubes

Rachel Designs Mask Set35-3

Here  Rachel Designs Wordpress

Font Poker Kings

Open a 750x750

48 c/p size this down by 60%

26 c/p size this down by 60% pull the 1^st to the bottom of rocks’ take a 2^nd copy and pull behind the rocks

36 c/p size this down by 36% pull to fill the bottom of the rocks

Click back on top layer of your tag

Take the full size tube c/p size her down by 36% pull to the right of the rock

32 c/p mirror size this down by 36% pull to cover up the bottom of the tube

25 c/p size this down by 36% pull to the left edge of the sand

20 c/p size this down by 19% pull to sit on top of the green plant on left side of your tag

43 c/p size this down by 19% pull to the bottom of the green plant

30 c/p size this down by 14% pull to sit in front of the tube

4 c/p size this down by 14% pull to lean on right edge of the crates

11 c/p size this down by 14% pull to sit on ground by anchor

49 c/p size this down by 14% pull to sit in front of the crates

51 c/p size this down by 14% pull to sit in middle of the tag

7 c/p mirror size this down by 10% pull to sit on broken boat

22 c/p size this down by 16% pull to stand by mouse on broken boat

Click on bottom layer of your tag ( I size this down to 705x705) flood fill this layer with paper 5 apply mask from above, merge into one raster layer

Click on top most layer of your tag add a new raster layer for the copyrights and credit to kit make, add a saying to the tag and you’re done…

Thank you for reading my tutorial

©LadyDragus~ June 2023

Tag for kit maker 

Ella Steampower

This tutorial is written in Corel 2021, but any version should work, this is written in hopes you have  working knowledge of Paint Shop Pro or other graphics program… this is written by me, never meant to copy or look like your work…

I am using a PTU kit

By Wicked Diabla

Called Steampower

You can find it

Here Steampower

I am using an exclusive Tube

By Misticheskaya

Called Ella

You can find this tube

~PFD~ Ella ~

**remember you can buy the Exclusive tubes at a little higher price than normal tubes**

Vivienne’s Digital Tagging Masks 0083

Viviennes Blog

Open a 750x750

67 c/p rotate 45° to the right , then size this down by 69%

70 c/p size this down by 31% pull to the bottom left of the frame

Take the colorized version of the tube you wish to use, c/p size her down by 24% pull to sit in top of the suitcase’s

33 c/p size this down by 65% pull to the right edge of the frame, now click on the frame layer, erase any that is showing behind the stairs (insert pic)

2 c/p size this down by 25% pull to sit on the lip of 2^nd suitcase

15 c/p pull to sit on the top of the stairs, make a 2^nd copy of the stairs, so some of them is showing on the bottom of E2

43 c/p size this down by 35% pull to sit on right side of suitcases

52 c/p size this down by 21% pull so it looks’s like it is hanging of her left wing ring

85 c/p size this down by 17% pull to sit under her foot

102 c/p size this down by 14% pull to sit in the middle of the stairs

6 c/p size these down by 10% pull to sit on stair under the wineglass

81 c/p size this down by 18% pull to sit by the purse on the ground

97 c/p size this down by 12% pull to sit on the left edge of the book

7 c/p size this down by 23% pull to sit on bottom step of the stairs

Click on bottom layer of your tag flood fill with paper 1 apply the mask from above, or one of your choice ( I choose this as it has steampunk gears on it) merge this into one layer.

Click on top most layer of your tag make a new raster layer for the copyright and credit to kit maker, and License information, add a saying to the tag and you’re done…

Thank you for reading my tutorial

©LadyDragus~ 2023