Pink and Gold Passion

This tutorial is written in Corel X5, it is written in hopes

You have a working knowledge of Paint Shop Pro.

Any version of PSP should work, I have not tested it.

This is written out of my own mind and thought’s

Inspired by the PTU Kit by Pink Paradox Productins

Called Pink and Gold

She sells at her own store

Here Pink Paradox Productions

I am also using the wicked PTU artwork of

Alex Prihodko he sells

At Pics for Designs

Here PFD~Pics For Design

I am using a FTU Maks by Sophisticat Simone- Mask16

You can find all of her freebies

Here Simones Tutorials

Open a 700x700 size tag, you can always re-size it later…

On big tubes with many layers, you will need to merge what colors out of the tube you want, I used a pink hat, with the gold out fit for the body, and feet…

E35 c/p re-size by 65% pull it up some on your tag, not much

Add a high pass sharpen with these settings

Radius 10

Strength 50

Blend Mode Overlay

Now take your tube paste as a new layer, using your crop tool, after re-sizing down by 60% crop off the bottom part of the tube to make it look like she is coming out of the frame, clean off how ever you like to do this…

77 c/p re-size by 50% pull to the bottom edge of the tube and frame…

108 c/p rotate 90° to the right and pull it to the top part of the music box…

9 c/p mirror re-size by 45% pull to the lower left hand edge of your tag, but above the top left corner of music box…

107 c/p rotate 90° to the left and re-size by 75% add a sharpen more to the element; pull to the middle bottom of the music box…

1 c/p re-size by 35% pull to the far right hand edge of your tag, add a sharpen to the doggie…

43 c/p re-size by 40% pull to the lower right hand edge of your tag, in front of the dog…

27 c/p mirror re-size by 35% pull to the top right hand edge of the box…

31 c/p re-size by 30% pull to the lower right hand edge of the box, but on the side of it…

19 c/p mirror re-size by 20% pull to the left hand edge of your box on the ground…

7 c/p re-size by 25% pull to make it look like it’s sitting on top of wine bottle…

18 c/p re-size by 30% pull to the lower left hand edge of your tag…

17 c/p re-size by 25% pull to the right edge of element 18

44 c/p re-size by 35% pull to the bottom of bottles on the left hand edge of your tag…

11 c/p re-size by 25% pull to the right hand edge of tag, in front of brown and pink box

117 c/p re-size by 50% pull to the left hand edge of your tag, then using Contol+E copy and paste it on the right hand edge of your tag…

Got to the bottom layer of your tag, and flood fill with paper1 apply mask from above or one of your own choice, merge into one layer

Then go back to the top layer, add a new one to put your copyright and give credit to kit maker, make sure you add a water mark for the tag, so others can not rip your tag…

A tag for the mask lady