Steampunk Feel

This tutorial is written in Corel 2021, but any version should work, this is written in hopes you have  working knowledge of Paint Shop Pro or other graphics program… this is written by me, never meant to copy or look like your work…

I am using a PTU kit

By Scrap Dimensions  

She has her kits listed

Here Scrap Dimensions

I am using an exclusive tube

From Pic for designs

By Alehandra_Vanhek

Called Lady and Cat

Here Lady and Cat

BBD_2012 SPmask 5

Here Bitzy Beez Designz

Open a 750x750

E25 c/p rotate 90° to the right size it down by 66%

Take the colorized version of the tube we are using, c/p size it down by 23% pull to the left side of the frame

E20 c/p size this down by 35% pull to the far right hand edge of the tag

SD_SF 10 c/p size this down by 30% pull to the bottom right corner of the frame

E3 c/p size this down by 35% pull to the upper right of the frame

SD_SF E1 c/p size this down by 35% pull to sit on right of the cat

SD_SF 12 c/p size this down by 35% pull to sit in front of trunk

E32 c/p size this down by 35% pull to sit on right edge of our tube

E31 c/p size this down by 14% pull to sit on top of trunk

SD_SF 3 c/p size this down by 30% pull to sit in front of the tube

SD_SF 7 c/p size the bear down by 21% pull to sit on left of trunk in front of the cat

SD_SF 5 c/p size this down by 21% pull to sit in between clock and bear
E13 c/p size this down by 31% pull to hang off E20

E12 c/p size this down by 31% pull to sit on top of the clock

14 c/p size this down by 31% pull to sit on top of the right side of your tag

Click on bottom layer of your tag flood fill with

SD-SF Paper3 apply mask from above, merge this into one layer.

Click on top most layer of your tag add a new raster for the copyright and License information , make sure to give the kit maker credit if she requires this, add a saying to the tag and you’re done…

Thank you for reading my tutorial

©LadyDragus~ 2023

Tag for kit maker and mask maker