Wolfia

 

This tutorial is written in Corel 2021, but any version should work, this is written in hopes you have  working knowledge of Paint Shop Pro or other graphics program… this is written by me, never meant to copy or look like your work…

 

I am using a PTU kit

By PortugueseGirl Designs

Called Wolfia I am also using the tube that inspired the kit

 

You can find the tube

Here Wolfia Tube

 

You can find the kit

Here PGD~ Wolfia

 

 

 

Open a 750x750

2 c/p size this down by 75% leave as it falls on the tag

10 c/p pull behind the house, size this down by 50% pull so this show’s up on the left edge of the house.

Click on top layer of your tag

98 c/p size this down by 55% pull to the top right top of the house,

1 c/p size this skull down by 30% pull to the top of the arch on the house.

4 c/p size this down by 32% pull to the far left edge o house,

Take the colorized version of the tube we are using, c/p size her down by 12% pull her so she is sitting on left edge of the house.

36 c/p size this down by 26% pull to stand on left edge of the tube

12 c/p size this down by 30% pull to far right edge of the house.

33 c/p size this down by 30% pull so this is hanging off the right plant so it looks like it is hanging on top branch

31 c/p size this down by 25% pull to sit in middle of porch steps

29 c/p size this down by 21% pull to sit in front of the tube’s staff

9 c/p size this down by 22% pull to the middle of the tag

17 c/p size this down by 17% pull to stand on edge of porch rail on right side of the house.

40 c/p size this down by 15% pull to sit by egg on the stand

34 c/p size this down by 25% pull to sit in between cauldron and egg

15 c/p size this down by 25% pull to sit in front of crystal on ground

11 c/p size this down by 20% pull to sit by fire skull

70 c/p size this down by 15% pull to sit on string hanging on the porch

107 c/p size this down by 75% pull to hang over the top of the house.

105 c/p negative image the clouds, size it down by 55% pull to the top right of the house.

52 c/p mirror size this down by 25% pull to stand on left edge of the cauldron

Add a new raster layer for the tag, so you can add your license information, and credit to kit maker, add a saying to the tag and your done…

 

Thank you for reading my tutorial

©LadyDragus~ 2022

Tags for kit maker and artist 

 

Snow Morning

 

This tutorial is written in Corel 2021, but any version should work, this is written in hopes you have  working knowledge of Paint Shop Pro or other graphics program… this is written by me, never meant to copy or look like your work…

 

I am using a PTU kit

By PortugueseGirl Designs

Called Snow Morning

Here Elida ~ Snow Morning matching kit

This is also an exclusive kit to Elegancefly, to match  the tube

By Sheokate  Called Elida

 

 

The Tube

Here Elida

 

I am using a FTU mask by

WSL_310

Wee Scots Lass

Open a 750x750

Open paper 11 size this down to fit inside of the canvas, then apply mask from above

23 c/p size this down by 80% pull this to the mask layer pull so some of it is hidden on the right edge of t he mask

40 c/p size this down by 60% pull inside of the mask above the bridge, then pull to the far left edge of the mask

11 c/p size this down by 70% pull to sit on right edge of the bridge, on the outside of the mask

90 c/p size this down by 60% pull to sit on the left edge of the wooden bridge

84 c/p size this down by 44% pull to sit at left edge of snow

Take the colorized version of the tube we are using #5 c/p size her down by 16% pull to sit in the middle of the snow

1 c/p size this down by 60% pull to the bottom edge of the tube

85 c/p mirror size this down by 35% pull to sit on left of animals in snow

78 c/p mirror size this down by 34% pull to sit on tree stump on left side

100 c/p size this down by 34% pull to sit in front of rabbit

19 c/p size this down by 15% pull to stand in front of wagon wheels

87 c/p size this down by 18% pull to sit on left edge of snow

86 c/p size this down by 18% pull to right of blue mushroom

26 c/p size this down by 22% pull to sit on right edge of the mushrooms

69 c/p size this down by 25% pull to stand in front of the animal on the sled

65 c/p size this down by 15% pull to stand on right side of lantern

39 c/p size this down by 15% pull 1^st copy to sit on mushroom in front of the bunny girl, a second one in front of little cow, and the 3^rd in front of the wagon wheels

46 c/p size this down by 15% pull to sit in front of coco in front of wagon wheels…

Add a new raster layer for the copyrights and credit to kit maker, make sure you have a valid License to use this person artwork, add a saying to the tag and you’re done…

 

Thank you for reading my tutorial

©LadyDragus~ 2022

 

Rose

 

This tutorial is written in Corel 2021, but any version should work, this is written in hopes you have  working knowledge of Paint Shop Pro or other graphics program… this is written by me, never meant to copy or look like your work…

 

I am using a PTU kit

By PGD Called Rose

This also match’s a tube

by Sheokate Rose tube

 

You can find the kit

Here  ~EX~ Rose

 

 

You can find the tube

Here  ~Sheokate~ Rose

 

RachelMask Set 31-4

Here Rachel Designs Wordpress blog 

Drop shadow (DS)

Vertical 10

Horizontal 6

Opacity 65

Blur 10

Color black

 

Open a 750x750 size tag (size down at the end)

Open paper 18 size this down to fit inside of your canvas paste

I’m using a mask by Rachel (Above) apply the mask to the paper layer merge the group

E42 c/p size this down by 65%

Take the colorized version of the tube we are using paste her size her down by 25% pull to the middle of archway, and then pull it inside of the mask layer of your tag

E116 c/p size this down by 65% pull to the bottom of archway, just at the bottom of the tube

E14 c/p size this down by 44% pull to the left edge of tube

 

E4 c/p size this down by 44% pull to the left edge of archway

E98 c/p mirror size this down by 44% pull to the right edge of archway

E8 c/p size this down by 44% pull to the upper right edge of archway, add DS from above

E18 c/p size this bird down by 25% pull to sit on top of cage w/ skull

E15 c/p size this down by 15% pull to sit in front of gargoyle

E1 c/p size this down by 28% pull to sit on left edge of mushrooms

E12 c/p size this down by 28% pull to sit on right of glass w/body

E5 c/p size this down by 15% pull to sit in front of tombstone

E113 c/p size this down by 22% pull to sit on left edge of tombstone

E36 c/p size this down by 22% pull to sit on right of mushrooms

E47 c/p size this down by 30% pull to fly over the tombstone

E40 c/p pull so it is over the tube in the middle of your tag

Add a new raster layer for the copyrights; add a saying to the tag and you’re done…

 

Thank you for reading my tutorial

 

** when showing off a tag you make with this tutorial only use the copyright for the tag you are using and credit to the kit maker, Never put copyright and my tutorial link, this is against any artist TOU

Thank you for understanding **

 

©LadyDragus~ February 2022

 Tags for kit maker and mask maker 

 

  

Witch’s School

 

This tutorial is written in Corel 2021, but any version should work, this is written in hopes you have  working knowledge of Paint Shop Pro or other graphics program… this is written by me, never meant to copy or look like your work…

 

I am working with a PTU kit

By PortugueseGirl Designs (PGD)

Called Witches School this is a exclusive match to a tube by Sheokate

 

You can find the kit

Alessa-Wtiche'sSchool PGD

 

 The tube

Alessa~ Extended Tube

 

Font: Magic Scholl One

 

Open a 750x750 tag

E103 c/p size down by 80%

E32 c/p pull this to the bottom of the frame

E30 c/p size the bookshelf down by 45% pull to the far left edge of the tag

E33 c/p pull behind the bookshelf and size it down by 30% pull to the upper right behind to make it look like the globe is sitting on top of bookshelf

E1 c/p size this set of books down by 43% pull to the lower right of your tag

Take the colorized version of the tube that match’s the kit, )if you don’t have this a sitting down tube would work also), size this tube down by 15% pull to sit in front of books

E2 c/p size this book down by 35% pull to sit on left edge of the tube

E81 c/p size this book down by 25% pull to sit on the right side of the tube

E92 c/p size the kitten down by 30% pull to sit in front of book on stand

E11 c/p mirror size down by 25% pull so it is laying on the kittens leg

E6 c/p size this down by 25% pull to sit on left of the open book on right edge of the tag

E70 c/p size it down by 25% pull to the far left of your tag on the floor in front of bookshelf

E69 c/p size down by 25% pull to the left of other bottle

E67 c/p size down by 25% pull to sit on left of bottle with flower on the top

E65 c/p size this bottle down by 20% pull to sit on left edge of green bottle

E58 c/p size this kitten down by 34% pull to stand in front of bottles on left edge of your tag

Click on bottom layer of your tag, using your Ellipse Tool draw a circle behind the frame, make sure to promote this to a raster layer.

Click on top most layer of your tag add a new raster layer for the copyrights and credit to kit maker, add a saying to the tag and you’re done…

 

Thank you for reading my tutorial

©LadyDragus~ August 2021 

Tag for kit maker and artist 

 

Sea Queen

 

This tutorial is written in Corel X5, but any version should work, this is written in hopes you have  working knowledge of Paint Shop Pro or other graphics program… this is written by me, never meant to copy or look like your work…

 

I am using a PTU kit

By PGD

This is sold

Here PGD~Match Kit SeaQueen

 

I am also using the matching tube

By Sheokate

Called Elenor

I am only showing off 2 of the previews that come with the extended version of this tube 

 

Here  Elegancefly ~ Eleanor

Rachel Desings mask 6_4

Here Rachel Designs Blog

You can download this on the right edge of this blog as a bulk download

Here new blog

Here Rachel Designs ~ New Blog

 

 

 

Open 750x750

E3 c/p size this down by 85%

E8 c/p size this down by 60% pull to the left side of the doors

E5 c/p size this down by 55% pull to sit on left edge of the tag, and take a 2^nd copy and pull it to the right edge this will give us more sand

E20 c/p size down by 45% pull to sit in front of green plant

E41 c/p size this down by 45% pull to the right edge of the tag

Take the colorized version of the tube you wish to use, c/p size her down by 15% pull to the middle of the tag  

E35 c/p size this down by 30% pull to sit in front of plant on right edge of the sand

E26 c/p size this down by 30% pull to sit behind the tube on the left edge of sand

E31 c/p size this fish down by 30% pull to the upper left edge of the tag

E32 c/p size the jellyfish  down by 45% pull to the upper right of the tag

E54 c/p mirror size this down by 55% pull to sit beside the E35 so it cover’s just a bit on the right edge

E52 c/p size this fish down by 26% pull to float above the coral

E21 c/p size this fish down by 25% pull to float over the chest

E55 c/p size this jellyfish down by 26% pull to the upper right just above the door

E88 c/p size this down by 26% pull to sit on the left edge of the chest

E79 c/p the “apple” crab size down by 26% pull to sit on right of tube by small rock(look like an apple to me LOL )

E56 c/p pull this up to the left edge of tag just under the green/purple beta

E16 c/p leave the bubbles as the fall on the tag

Click on bottom raster of your tag flood fill with page 16. apply mask from above then merge into one layer

 

Click on top most layer of your tag add a new raster layer for the credits and copyright information for the artist, make sure you have a valid Lic to use these tubes …

 

Thank you for reading my Sea Queen tutorial

©LadyDragus~ 2021

Tags for kit maker and mask maker