Autumn Fairy

This tutorial is written in Corel 2023, but any version should work, this is written in hopes you have  working knowledge of Paint Shop Pro or other graphics program… this is written by me, never meant to copy or look like your work…

 I am using a PTU kit

By Carita Creationz 

Called Sunny Autumn

You can find the kit

Here sunny Autumn Kit

I am using a PTU tube

By Queen Uriel 

Called Autumn Fairy Queen

You can find this Autumn Fairy Queen Tube

WSL_Mask 110

here Mask

Open a 750x750

38 c/p leave how this falls on the tag

9 c/p size this down by 65%,then leave in the middle of the tag

25 c/p size this down by 90% pull behind the frame

4 c/p mirror size this down by 35% pull to the upper left of the frame

11 c/p size this down by 30% pull to sit on the right middle of the tag

Click on top layer of your tag

Take the tube we are using make close up and paste as a new layer, then clean up the tube to show just inside of the frame

30 c/p size this down by 60% pull to the bottom left  of the tube, then take a 2nd copy of this mirror and pull to the lower right bottom of the tube

29 c/p rotate 45° to the left size this down by 30% pull down to the bottom left of your tag

32 c/p rotate 90° to the right size down by 36% pull to sit the ends of the leaves 

27 c/p pull to the lower left edge of the frame, size it down by 40% this will cover the bottom of the leaves

19 c/p size this down by 20% pull to the lower left of sunflower

17 c/p size this down by 21% pull to sit on left side of brown flower

24 c/p size this down by 21% pull to sit on left top of the brown flower

5 c/p size this down by 20% pull to sit on right edge of the flowers 

6 rotate 45° to the left size down by 20% 

Add this drop shadow to the butterfly

Vertical 3

Horizontal 3

Opacity 65

Blur 5

Color black

2 c/p size this down by 20% pull to sit in middle of the patch of leather

52 c/p size this down by 32% pull the word art where the letter A is over the little house, then add the drop shadow from above

45 c/p size this down by 20% pull so the top of the pumpkin stem is on the T in our wordart

Click on bottom layer of the tag 

Open paper 14 size this down to 720x720 paste as a new layer, apply the mask from above. 

This is where you can size the tag down, before adding credits for tube and kit maker… 

Click on top most layer of your tag add a new raster layer for the copyrights and credit to kit maker, add a saying to the tag and you’re done… 

Thank you for reading my tutorial 

©LadyDragus~2024

Jungle Traveler

This tutorial is written in Corel 2021, but any version should work, this is written in hopes you have  working knowledge of Paint Shop Pro or other graphics program… this is written by me, never meant to copy or look like your work…

I am using a PTU kit

By Yudes Kreationz

Called Jungle Wildlife

Here YKS-Yudes Kreationz Store

~DGD~ 

~ATG~ 

~RAW~ 

~DDR~ 

~MM~ 

I am using a PTU Exclusive tube

By Alehandra_Vanhek Called Travel Girl

You can find this

Here  Traveler Girl

Wsl_68

Here Weescotslass

Open a 750x750

17 c/p size this down by 60%

28 c/p size this down by 22% pull behind the rocks but make it look like the birds are on top of the rocks

64 c/p size this down by 36% pull to make it look like it’s on the left edge of the rocks

Click back on top layer of your tag

10 c/p size this down by 46% pull to sit on rocks

36 c/p size this down by 45% pull this to the left edge of E17

20 c/p size this down by 53$ pull to the right edge of the rocks

12 c/p size this down by 22% pull to sit by flowers on left edge of rocks

Take the tube we are using paste her as a new layer, then size her down by 17% pull to the bottom of the rocks

59 c/p size this down by 22% pull to sit by her bended knee

47 c/p size this down by 22% pull to sit on top left edge of the tree stump

8 c/p size this down by 22% pull to the far left of the tree stump

48 c/p size this down by 22% pull to sit by red flowers

57 c/p size this down by 15% pull to the far right edge of the tube

16 c/p size this down by 13% pull to the upper left edge of the rocks

7 c/p size this down by 17% pull to sit in front of red flowers on left edge of the tag

Click on bottom layer of your tag flood fill with paper 15 apply mask from above, then merge into one layer

Click on top most layer of your tag add a new raster layer for the credit to artist and License information, add a saying to the tag and you are done…

Thank you for reading my tutorial

©LadyDragus~2023

Darkest Rose

This tutorial is written in Corel 2021, but any version should work, this is written in hopes you have  working knowledge of Paint Shop Pro or other graphics program… this is written by me, never meant to copy or look like your work…

I am using a PTU kit

By House of Dragus Graphics

Called Darkest Rose

You can find it

House Of Dragus Graphics

&

Berry Applicious Store

 Mystical Scraps Store~ Bundles ~

I am using a PTU tube

By Nocturne (exclusive tube)

Vampy

Here ~Exclusive Tube~ Vampy

WSL_196

Here  WeeScots lass

Open a 750x750

171-9 size this down by 80%

28 c/p flip vertical size this down by 80% pull to the upper left edge of the frame

101 c/p size this down by 40% pull to the lower right edge of the frame

68 c/p size this down by 40% pull to the left edge of the tag

Take the colorized version of the tube (red): copy and paste this as a new layer, size her down by 31% pull to the middle of the frame

102 c/p size this down by 30% pull to sit on left edge of the tube

9 c/p size this down by 11% pull to sit on her shoe

89 c/p size this down by 20% pull to sit on left of brown rose

44 c/p size this down by 12% pull to sit on left of candles

117 c/p size this down by 35% pull to float in front of the tube

4 c/p size this down by 25% pull to sit by candles

84 c/p size this down by 15% pull to sit by black and red rose on right side of the tube

82 c/p size this down by 15% pull to the middle of the bottles

83 c/p size this down by 25% pull to sit on the right edge of the tag

24 c/p size this down by 13% pull to sit by goblet

Click on bottom layer of your tag

Open paper 18 size this down to 725x725 paste as a new layer, then apply the mask from above, this will leave only the flower as the background…

Merge this into one layer

Click on top most layer of the tag add a new raster layer for the credit and License information, add a saying to the tag and you’re done…

Thank you for reading my tutorial

©LadyDragus~~ 2023

Here are the tags I made with the cluster frames 

This tutorial is written in Corel 2021, but any version should work, this is written in hopes you have  working knowledge of Paint Shop Pro or other graphics program… this is written by me, never meant to copy or look like your work…

I am using a PTU kit

By Angel Wing Scraps

Called Bridget’s Lucky Clover

This kit is exclusive to the Digital Scrap Book Shop

Bridget's Lucky Clover

I am using a PTU tube

By Vermany

St. Patrick’s Day 2

Here Verymany tubes

WSL mask 219

Open a 750x750

Frame 6 c/p size down by 65% rotate 90° to the right

Take the tube we are using c/p size her down by 40% pull to the right edge of the frame

Take Bella 3 c/p size this down by 45% pull to the left edge of the frame, some of the house will be over your tube

Flowers 4 c/p size this down by 40% pull to cover up the bottom of the tube

Lucky bear 1 c/p size this down by 20% pull to sit on left edge of white flowers

Lucky gnome c/p size him down by 25% pull to stand in front of the house 

Lucky owl 2 c/p size this down by 20% pull to sit by the steps on the house 

Gold coins c/p size this down by 20% pull to sit on right side of the bear

Lucky owl 1 c/p size this down by 20% pull this one to sit on far right green leaf on our flowers

Mug of ale 2 c/p mirror size this down by 14% pull to sit on right side of coins

Lucky cake c/p size this down by 12% pull to sit in front of the bear

Lucky leprechaun c/p size him down by 12% pull to sit on left of the cake

Clover butterfly c/p size this down by 21% pull to fly above the house 

Pot of gold 2 c/p size this down by 17% pull to the far left side of your tag

Sparkles 2 c/p size this down by 41% pull the 1^st copy to the left top of the tag, take the 2^nd copy and pull it to sit on the right of the tube, on her hair

 Click on bottom layer of your tag

Clover frame 2 c/p size this down by 75% pull to fit behind the other frame

Open paper Bella 7 size this down to 710 paste as a new layer, apply mask from above, merge this into one layer.

Click on top most layer of the tag add a new raster for the copyright & License information, add a name or saying to the tag and you’re done…

Thank you for reading my tutorial

©LadyDragus~ 2023

Snow Morning

This tutorial is written in Corel 2021, but any version should work, this is written in hopes you have  working knowledge of Paint Shop Pro or other graphics program… this is written by me, never meant to copy or look like your work…

I am using a PTU kit

By PortugueseGirl Designs

Called Snow Morning

Here Elida ~ Snow Morning matching kit

This is also an exclusive kit to Elegancefly, to match  the tube

By Sheokate  Called Elida

The Tube

Here Elida

I am using a FTU mask by

WSL_310

Wee Scots Lass

Open a 750x750

Open paper 11 size this down to fit inside of the canvas, then apply mask from above

23 c/p size this down by 80% pull this to the mask layer pull so some of it is hidden on the right edge of t he mask

40 c/p size this down by 60% pull inside of the mask above the bridge, then pull to the far left edge of the mask

11 c/p size this down by 70% pull to sit on right edge of the bridge, on the outside of the mask

90 c/p size this down by 60% pull to sit on the left edge of the wooden bridge

84 c/p size this down by 44% pull to sit at left edge of snow

Take the colorized version of the tube we are using #5 c/p size her down by 16% pull to sit in the middle of the snow

1 c/p size this down by 60% pull to the bottom edge of the tube

85 c/p mirror size this down by 35% pull to sit on left of animals in snow

78 c/p mirror size this down by 34% pull to sit on tree stump on left side

100 c/p size this down by 34% pull to sit in front of rabbit

19 c/p size this down by 15% pull to stand in front of wagon wheels

87 c/p size this down by 18% pull to sit on left edge of snow

86 c/p size this down by 18% pull to right of blue mushroom

26 c/p size this down by 22% pull to sit on right edge of the mushrooms

69 c/p size this down by 25% pull to stand in front of the animal on the sled

65 c/p size this down by 15% pull to stand on right side of lantern

39 c/p size this down by 15% pull 1^st copy to sit on mushroom in front of the bunny girl, a second one in front of little cow, and the 3^rd in front of the wagon wheels

46 c/p size this down by 15% pull to sit in front of coco in front of wagon wheels…

Add a new raster layer for the copyrights and credit to kit maker, make sure you have a valid License to use this person artwork, add a saying to the tag and you’re done…

Thank you for reading my tutorial

©LadyDragus~ 2022