Moonlight Faery

This tutorial is written in Corel 2021, but any version should work, this is written in hopes you have  working knowledge of Paint Shop Pro or other graphics program… this is written by me, never meant to copy or look like your work…

I am using a PTU kit by

Angel Wing Scraps

Called Moonlit Storm

You can find this

Digital Scrap Book Shop

 Here Blog Angel Wing Scraps Blog

I am using a PTU Extended tube

By Sheokate

Elvira Sheokate

 You can find a wallpaper made with kit and tube in my 2023 wallpaper folder 

MPM Mask 70

Here Millies PSP Madness

Open a 750x750

98 c/p size this down by 50% paste the frame again but only size it down by 56% and colorize it to the purple in your tube. Then size them down again by 90% to make smaller

74 c/p size this down by 70% pull to the bottom left of the frame, take a 2^nd copy mirror and pull to right of the frame

11 c/p size this down by 70% pull to the bottom left of the tag

Take the colorized version of your tube (I used purple) c/p size her down by 16% pull to the middle of the tag

20 c/p size this down by 50% pull to the bottom right of the tube

4 c/p size this down by 25% pull to sit by the tubes knees

43 c/p rotate 90° to the left size down by 24% pull to sit on top of small leaves on the right

19 c/p size this down by 24% pull to sit in front of pink flower

76 c/p size this down by 70% pull to rain over the tube

30 c/p size this down by 33% pull to the upper right of the frames, by the rain cloud

75 c/p size this down by 55% pull to the bottom of the tag/tube

5 c/p size this down by 25% pull to sit in front of the tube on the water pools

6 c/p mirror size this down by 21% pull to sit on top of the pink flower

1 c/p size this down by 25% pull so she is flying by the birds on the tree w/ birdhouse.

Click on bottom layer of your tag flood fill with paper AI4 apply the mask from above, then merge it into one layer.

Click back on top most layer of your tag add a new raster for the copyrights and credit to the kit maker, add a saying to the tag and you’re done…

Thank you for reading my tutorial

©LadyDragus~2023

Wolfia

This tutorial is written in Corel 2021, but any version should work, this is written in hopes you have  working knowledge of Paint Shop Pro or other graphics program… this is written by me, never meant to copy or look like your work…

I am using a PTU kit

By PortugueseGirl Designs

Called Wolfia I am also using the tube that inspired the kit

You can find the tube

You can find the kit

Here PGD~ Wolfia

Open a 750x750

2 c/p size this down by 75% leave as it falls on the tag

10 c/p pull behind the house, size this down by 50% pull so this show’s up on the left edge of the house.

Click on top layer of your tag

98 c/p size this down by 55% pull to the top right top of the house,

1 c/p size this skull down by 30% pull to the top of the arch on the house.

4 c/p size this down by 32% pull to the far left edge o house,

Take the colorized version of the tube we are using, c/p size her down by 12% pull her so she is sitting on left edge of the house.

36 c/p size this down by 26% pull to stand on left edge of the tube

12 c/p size this down by 30% pull to far right edge of the house.

33 c/p size this down by 30% pull so this is hanging off the right plant so it looks like it is hanging on top branch

31 c/p size this down by 25% pull to sit in middle of porch steps

29 c/p size this down by 21% pull to sit in front of the tube’s staff

9 c/p size this down by 22% pull to the middle of the tag

17 c/p size this down by 17% pull to stand on edge of porch rail on right side of the house.

40 c/p size this down by 15% pull to sit by egg on the stand

34 c/p size this down by 25% pull to sit in between cauldron and egg

15 c/p size this down by 25% pull to sit in front of crystal on ground

11 c/p size this down by 20% pull to sit by fire skull

70 c/p size this down by 15% pull to sit on string hanging on the porch

107 c/p size this down by 75% pull to hang over the top of the house.

105 c/p negative image the clouds, size it down by 55% pull to the top right of the house.

52 c/p mirror size this down by 25% pull to stand on left edge of the cauldron

Add a new raster layer for the tag, so you can add your license information, and credit to kit maker, add a saying to the tag and your done…

Thank you for reading my tutorial

©LadyDragus~ 2022

Tags for kit maker and artist 

Vamp Witch

This tutorial is written in Corel 2021, but any version should work, this is written in hopes you have  working knowledge of Paint Shop Pro or other graphics program… this is written by me, never meant to copy or look like your work…

I am working with a PTU kit

By PortugueseGirl Designs

This is sold here

Spider Witch PGD

 I am using a Tube

By Sheokate

Called Alessa

You can find her
here Alessa

I am also using a 2^nd tube

Called Rose

You can find her

Here Rose

Open a 750x750

103 c/p size this down by 75% take the standing tube c/p size her down to fit inside of the mirror clean off any of her dress that is showing outside of the mirror , make her opacity 48 then merge her into the mirror

71 c/p size this down by 61% pull to the bottom of the mirror

97 c/p size this down by 80% pull to lay on the outside of pentagram

104 c/p size this down by 60% pull to the middle of the mirror

Take the other tube c/p size her down by 15 mirror pull to the left edge of the tag

62 c/p size this down by 60% pull to the right edge of the tag

38 c/p size this down by 35% pull to sit in front of the candles

4 c/p size this down by 25% pull to sit by vamp blood

58 c/p size this down by 20% pull to sit in front of the tube

2 c/p size this down by 20% pull to si ton the visible point on pentagram

91 c/p size this down by 20% pull to just the right of bottle

25 c/p size this down by 20% pull to sit on globe

59 c/p size this down by 33% pull to the upper left edge of mirror

46 c/p size this down by 35% pull to the left edge of our tube

107 c/p size this down by 25% pull to sit on right edge of the globe

63 c/p size this down by 20% pull so this spider looks to be climbing up the mirror

13 c/p size this down by 20% pull to sit on left side of the globe

Click on bottom layer of your tag

Take E57 c/p size it down by 55% pull so it looks like a moon behind the mirror

Click back on top layer of your tag add a new raster layer

Add your copyright information and credit to kit maker, add a saying to the tag and your done..

Thank you for reading my tutorial

©LadyDragus~2022

Spider Witch

This tutorial is written in Corel 2021, but any version should work, this is written in hopes you have  working knowledge of Paint Shop Pro or other graphics program… this is written by me, never meant to copy or look like your work…

I am using a PTU kit

By Mythical Desgins

Called Spider Witch

You can find her kits

Elegancefly Store

 All that Glitterz

 Pics For Designs

WSL_HalloweenMask2

Here WeeScots Lass Creations

Font: Spiderfingers

Open a 750x750 size tag

Frame 3 c/p size this down by 70%

66 c/p size this down by 75% pull to the left edge of your frame

Take tube 2 c/p size her down by 15% pull to sit on right edge of the house.

44 c/p size this down by 75% pull to sit on bottom of your tube

38 c/p size this down by 50% pull to the right edge of the ground

19 c/p size this down by 26%pull to sit on top of books

40 c/p size this down by 40% pull to sit on left edge of the books

18 c/p mirror size this down by 50% pull to sit in front of the house .

22 c/p size this down by 26% pull to sit by black cat

23 c/p size this down by 25% pull to the right of other bottle

31 c/p size this down by 25% pull to sit on right edge of books

11 c/p size this down by 25% pull to sit on left edge of blue bottle

37 c/p size this down by 25% pull to sit on right of cauldron

56 c/p size this down by 25% pull to sit under pink bottle on books

48 c/p size this down by 25% pull to sit on left side of cauldron

Click on bottom layer of your tag take paper 12 size to fit a 700x700 canvas(this is what I size my tags down to) apply mask from above, merge into one layer..

Click on top most layer of the tag add a new raster layer for the credits and your saying on the tag.

Thank you for reading my tutorial

©LadyDragus~ October 2022