Be My cupcake  Bunnie 

I’m using a PTU Scrap kit by Wicked Princess Scraps

The name is Cupcake Attitude

She sells at many stores you can find them

All here Wicked Princess Scraps

I’m using a PTU tube by Keith Garvey

You can buy his work at his store

Here  Grav-Girls

I made a template called Be my Bunnie

And I also made some word art Called Be my bunnie cupcake

They will both be used in this tutorial

They can both be downloaded below this post..

Open the template re-move the copyright layer

Open pp8 flood fill the egg layer

Take the close up of your tube and paste it over the pp8 clear off the tip of the ears and the bottom of the shoulders to make it fit in the egg shape

Butterflyflowerbow c/p re-size by 45% and

pull it to the left hand side of the top egg border

coffe pot c/p re-size by 35% pull it to the bottom square but stay

on top of the egg shape…

cup c/p re-size by 35% pull to the tip of the pot where the heart goes over the spout…

cup c/p re-size by 35% pull to the tip of the pot where the heart goes over the spout…

pp1 flood fill the black part of the squares, they are all one layer

To make this easier on some you can hide the top layers above the squares to make sure

you get them the way you want them to look.. (I did)

We are going to use these in the 4 squares

Candied cupcake1 re-size by 50 Top left square

Candied cupcake2 re-size by 50  top right square

Ganachecupcake re-size by 45 Bottom left square

Heartcupcake2 re-size by 50 Bottom right square

Take one of the Bunnie wordart’s and copy it and paste it as a very upper most top layer

 You can add a glow to it or make your own Bunnie word art for your tag, or a different saying.. 

Candy2 c/p re-size by 30 copy this a few times to make it look like more candy is on the tag at least 3 rotate some a few degrees to make it look thrown down

Add your copyright to the tag and what ever saying you wish to have, and your all set..

Thank you for reading my tutorial

I would love to see any tags made with this tut..