Shabby Chic 

This tutorial is written in Corel 2023, but any version should work, this is written in hopes you have  working knowledge of Paint Shop Pro or other graphics program… this is written by me, never meant to copy or look like your work…

I am using a PTU kit

By Enchanted Scraps

Called Shabby

Chic Reverie

You can find this kit

Here Shabby Chic Reverie

I am using a PTU tube
By Fiodorova Maria
Called Yasmina

You can now find all of her tubes
Here https://www.vm-artists.com/pu-tubes/artist/fiodorova-maria

I am using a PTU font
Called Shabby (creative fabrica)

I am using a template  Cutest Chic

By Lin (she has them all on her facebook) Lin's Template Album

These are full size templates so we will have to size then down before you add your copyright
We will be working from the bottom layer to the top

This is a 3 piece forum set i’m using the big one and the avie
We are deleting the word art on the tag and the avie

We want to Shift+D to duplicate the temp, so we do not mess up the original temp.
Small circle 1&2 open paper 4 flip vertical then flood fill both of these close the paper
Teal Circle flood fill with paper 13 close the paper
Black circle flood fill with paper 8,close the paper
Black rectangle flood fill with paper 1 close the paper
Click on Gradient circle open E 87 c/p size this down by 34% pull so it is under the “glass”
Click back on the black circle layer
22 c/p size this down by 50% pull to the upper left of the circle
Now take the colorized version (I’m using the turquoise) drees, c/p size her down by 35% pull so it’s just her top half that is in the tag, crop off all of the bottom of the tube.
Click on the top layer of your tag
10 c/p slide to the right edge of the tag, size this down by 35% it will show just above the circles
2 c/p size this down by 35% pull to the middle of the rectangle layer
28 c/p size this down by 35% pull to sit on the right edge of the stack of books
40 c/p size this down by 35% pull to the far left hand edge of the tag
21 c/p size this down by 35% pull to sit on right edge of the candle
20 c/p size this down by 35% pull to sit on the left edge of the glass layer
65 c/p size this down by 31% pull to sit on right side of the blue flower
Add a new raster layer for the credits and add a name to the tag, and we are done with this part of the tag, now on to the Avatar

Ok click on avatar, remove the words and hide the glass layer for right now
22 c/p size this down by 31% pull to the upper left of the tag
Add the letters you want to show under the glass, then show glass and save.

Thank you all for reading my tutorial 

©LadyDragus~2025

Pirate Queen

This tutorial is written in Corel 2021, but any version should work, this is written in hopes you have  working knowledge of Paint Shop Pro or other graphics program… this is written by me, never meant to copy or look like your work…

I am using a PTU kit

By Carita Creationz

Called flying Pirates

You can now find this in her store

Here Flying Pirates

I am using a PTU tube

By Goldwasser (this is an exclusive tube)

Called Angelica

Here Angelica

RRMask 12-2

Here Rocked By Rachel

Open a 750x750 tag

13 c/p size this down by 65%

17 c/p size this down by 39% pull to hang off the left top of the frame

3 c/p size this down by 45% pull to the left edge of the tag

6 c/p size this down by 25% pull to sit on left edge of the barrel

9 c/p size this down by 70% pull to the far right edge of the frame

Take the tube we are using c/p size her down by 20% (I’m also using the layer with her parrot, and the gold on the floor) pull her to the right side of tag in front of the tree

1 c/p size this down by 41% pull to sit in front of barrel

40 c/p mirror size him down by 25% pull to sit on the treasure chest

16 c/p size this down by 27% pull the 1^st copy to sit on left edge of the blue treasure chest then take a 2^nd copy and pull to sit on the right side of the chest on the tube

23 c/p size this down by 31% pull to sit by the tube

35 c/p size this down by 19% pull to sit on left of the blue chest

4 c/p size this down by 19% pull to sit on right edge of chest

6 c/p size this down by 19% pull to stand in between the bottles

28 c/p size this down by 19% pull to sit on left of the blue parrot on the ground

8 c/p size this down by 23% pull to sit in the middle of the tag by her foot

7 c/p size this down by 22% pull to sit by green plant on right side of the tag

38 c/p size this down by 15% pull to sit on right of bottle with the skull

Click on bottom layer of your tag open paper 1 size it down to 710x710 paste as a new layer, then apply the mask from above, merge this into one layer

Click on top most layer of your tag add a new raster for the copyrights and credit to kit maker, add a saying to the tag and you’re done…

Thank you for reading my tutorial

©LadyDragus~24

Tag for Kit maker and mask maker

Thankful Times

This tutorial is written in Corel 2021, but any version should work, this is written in hopes you have  working knowledge of Paint Shop Pro or other graphics program… this is written by me, never meant to copy or look like your work…

I am using a PTU kit

By Scraps Dimension

Called Thankful Times

You can find it in her stores

Here

Scraps Dimensions

Mystical Scraps 

Digital Scrapping Depot

Magical Moments

I am using a PTU Exclusive tube

By Lady Mishka

(this was a prepaid or be a member of the Exclusive Club)

Lady Mishka~ Rachel with a kitten 

Horse plays mask 30 (it is the 1^st pack on the page below)

Here https://horseplayspasture.blogspot.com/search/label/Masks

Font:Bergidan (PTU) Creative Fabrica

Open a 750x750

63 c/p leave as it falls on the tag

Take the colorized version of the tube we are using I’m using the golden colors for her, c/p size her down by 10% pull to the left edge of the house.

11 c/p size the dogs down by 30% pull to sit on her left side

37 c/p size this down by 25% pull to the far right edge of the tag

12 c/p size this down by 13% pull to sit in front of the tube

34 c/p size this down by 21% pull to sit by the squirrel

9 c/p size this down by 21% pull to sit by cupcakes on the left edge

38 c/p size this down by 25% pull to sit by the bowl on left side

22 c/p size this down by 21% pull to sit in front of puppy dogs

64 c/p size this down by 18% pull to sit by 2^nd squirrel

29 c/p size this down by 15% pull to sit in front of drink

66 c/p size this down by 15% pull to sit on right edge of the cupcakes

Click on bottom layer of your tag

68 c/p pull this to the right top of the house.

Now click behind the tree take paper5 size this down to the size of 710x710 apply the mask from above, merge this into on layer

Click on top most layer of your tag add a new raster for the copyrights and a saying to the tag and you're done...

Thank you for reading my tutorial 

©LadyDragus~2023

Ice Cream

This tutorial is written in Corel 2021, but any version should work, this is written in hopes you have  working knowledge of Paint Shop Pro or other graphics program… this is written by me, never meant to copy or look like your work…

I am using a PTU kit

By Angel Wing Scraps

Called Here’s The Scoop

You can find this exclusively at

Digital Scrap Book Shop 

I am using an exclusive tube

By Yuki

Called Dorothy

You can find this tube

Here  Dorothy

Font: Niagara Solid

Open a 750x750

Frame 5 c/p size this down by 55%

Cart 1 c/p size this down by 40% pull to the right edge of the frame

Take the colorized version of the tube we are using (pink and blue) paste her as a new layer, size her down by 25% pull to sit on left edge of the tag

Cola 2 c/p size this down by 25% pull to sit by her feet

Girl 2 c/p mirror size this down by 25% pull to stand in front of big wheel on the cart

Boy 1 c/p size him down by 25% pull to the middle of the cart

Tin box 4 c/p size this down by 25% pull to sit by the knees on the tube

Ice lolli 1 c/p size this down by 16% pull to lean on the tin

Ice cream cup 1 c/p size this down by 16% pull to sit in front of the tin

Icy pop 1 c/p size this down by 16% pull to sit by ice cream cup

Banana split 1 c/p size this down by 16% pull to sit on right side of the tin

Parfait c/p size this down by 15% pull to sit by the cola

Sundae 2 c/p size this down by 20% pull to left side of cola

Milk Shake c/p size this down by 20% pull to sit on right of banana split

Watermelon 2 c/p size this down by 16% pull to sit in front of banana Split

Watermelon lolli 2 c/p size this down by 16% lean on the watermelon slice

Click on bottom layer of your tag

Open paper 8 using your rectangle tool draw a square behind the frame, convert this to a raster layer,

Click on top most layer of the tag add a new raster layer for the copyrights and credit to the kit maker, make sure you have a valaid PFD License to use this persons artwork, add a saying to the tag and you’re done…

 Thank you for reading my tutorial

©LadyDragus~ June 2023

Tag for kit maker 

Sleepover

This tutorial is written in Corel 2021, but any version should work, this is written in hopes you have  working knowledge of Paint Shop Pro or other graphics program… this is written by me, never meant to copy or look like your work…

I am using a PTU kit

By Wicked Diabla

Called Valentine Sleepover

You can find it

Here Valentines Sleepover Kit

I am using two tubes by Misticheskaya

Both are Exclusive tubes

 Pics For Desgins

WSL Mask 209

Here wee scottishlass

Font Quigley Wiggly

Open a 750x750

70 c/p size this down by 55%

Take the 1^st tube which she is sitting holding a pillow, pull this behind the frame size it down b 55% using your magic wand tool select all inside of the frame, then use modify and expand  this by 11 delete any of the tube that is showing outside of the frame

Click back on top layer of your tag

38 c/p size this down by 45% pull to the upper right top of the frame

71 c/p size this down by 45% pull to the left edge of your frame

Take the 2^nd tube we are using paste her size her down by 30% pull to the far right edge of the frame

1 c/p size this down by 25% pull to sit by her feet on left side of tag

60 c/p size this down by 22% pull to sit in front of the tubes right knee on ground

17 c/p size this down by 23% pull to sit in front of the left knee

19 c/p size this down by 17% pull to sit on right edge of the cake

14 c/p size this down by 12% pull to sit on the left of the cake

22 c/p size this down by 14% pull to sit in front of the cake

27 c/p size this down by 12% pull to sit on left of the teddy bear’s foot

52 c/p size this down by 12% pull to sit in front of rose in the vase

61 c/p size this down by 17% pull to sit in front of chocolate with rose’s

64 c/p size this down by 15% pull to sit by rose’s on the teddy bear

Click on bottom layer of your tag (this is where I size the tag down)

Flood fill with paper 3 apply mask from above, merge into one layer.

Click back on top layer of the tag add a new raster layer, for the copyrights and credit to the kit maker , add a saying to the tag and you’re done…

Thank you for reading my tutorial

©LadyDragus~ 2023

 Tag for Kit maker 

Jeepers  Witch

This tutorial is written in Corel 2021, but any version should work, this is written in hopes you have  working knowledge of Paint Shop Pro or other graphics program… this is written by me, never meant to copy or look like your work…

I am using a PTU kit

By Angel Wing Scraps

Called Jeepers Creepers

This kit can be found

Here 

 All that Glitterz Store

 Digital Scrap Store

My Memories

I am using an exclusive tube

By Veleri

Open a 750x750

Spiked frame 4 c/p size this down by 65%

Moon c/p size down by 35% pull to the upper right behind the frame

Haunted house 1 c/p size this down by 65% pull this to the left edge of your tag

Take the colorized version of the witch tube we are using, c/p size her down by 30% mirror pull her to stand on end of walkway

Candy dragon c/p size this down by 20% pull to sit on left edge of house.

Mummy pumpkin c/p size this down by 20% pull to sit in front of her broom

Candy monster c/p size him down by 20% pull so he is standing on the chimney on the house
sppoky tree c/p size this down by 16% pull to sit on left edge of cross tombstone

Ghost c/p size this down by 20% pull to fly over the moon

Witch mouse c/p size this down by 20% pull to sit on right of dragon

Vampire cat c/p size this down by 20% pull to the right of mummy pumpkin

Pumpkin pops c/p size down by 20% pull to hang on her hand on top of the broom

Devilish bat c/p size this down by 15% pull to sit on tombstone by tube

Witch owl c/p size this down by 20% pull to sit in front of her feet

Funny spider c/p size this down by 11% pull to sit on top of house by web

Bats c/p size this down by 30% pull to the bottom of the ghost on right side of your tag

Click on bottom layer of your tag

Open paper 22 using your circle tool draw one behind the frame, convert to a raster layer

Click on top most layer of your tag add a new raster layer for the copyrights and credit to the kit maker, add a saying to the tag and you’re done..

Thank you for reading my tutorial

©LadyDragus~ 2022