YYou will need to download my Show Time bundle of templates to work on this tutorial

They are FTU but please send them to my blog to download..

Open the Showtime-2

Take your tube a close up works best and paste it behind the frame pull it to the upper right hand side of the tag; use your freehand selection tool, and clean out just the face delete the rest of the layer…

We will be doing this a lot with the close up..

The end result will be a face behind each panel of the frame..

You should have 3 faces in total.. I do not use the float de-float because I’ve never been able to get it to work so I always use free hand selection, because I can get exactly what I want.. You use what ever method works best for you..

Open the card’s c/p under the grey background re-size by 70% rotate it by 45° to the right and pull it up to the right hand top of the temp

You are going to take that layer copy it and paste it and flip it and rotate 45° to the left hand side of the tag

Open NAO-Cyles5 c/p re-size by 45% and pull it to the right hand side of the tag

Now go to the upper layer and c/pWP-NAO-Cyles5 re-size it by 55% and mirror the cycle and pull it down to the bottom of the temp on the right hand side…

Open bullets use Shift+D and grey scale the bullets then apply these settings to them

Open the eight ball and c/p re-size by 20% and pull it to the end of the bullet on the left hand side of them…

Now click on the bike to get to that layer,

Open bottle and c/p re-size by 30%, pull it to the very edge of the rear wheel..

Now go to the grey layer of the template flood fill with paper9

Now take your full body pose of this tube and paste it over all the tag and make it the upper most layer of the tag.. IT does not need to be re-sized.. I’m sharpening it and also adding a drop shadow to it..