Mask the Pain

This tutorial is written in Corel 2021, but any version should work, this is written in hopes you have  working knowledge of Paint Shop Pro or other graphics program… this is written by me, never meant to copy or look like your work…

I am using a PTU kit

By Honored Scraps

Called Mask the Pain

You can find this kit

Here Mask the Pain Kit

I am using a tube by

Anna Marine (16-2)

You can find this tube

Here Anna Marine 16-2

Open a 750x750 size tag(size down at the end)

Frame 4 c/p rotate 90° to the left, size it down by 60%

17 c/p size this down by 81% pull to the top of the frame

Take the tube we are using, the one with the stone she is laying on, c/p size this down by 85% pull to the bottom of the frame

59 c/p pull to the left edge of the tag over the bottom left of the tube

38 c/p size this down by 73% pull to the lower left edge of the tag

44 c/p size this down by 50% mirror pull to the far right edge of the tag

53 c/p rotate 90° to the right, then size this down by 50% pull to hang on the lamppost

40 c/p size this down by 28% pull to sit by black mirror

43 c/p size the candle down by 30% pull to sit by bottle

30 c/p size this down by 30% pull to lay on top of the lamp post

26 c/p using the Brightness/Contrast, use the settings below to make the flower a darker black, then size it down by 23% pull to sit on right edge of the boards on the ground

48 c/p mirror size this down by 35% pull to sit on top of the lamp post

13 c/p size this down by 35% pull to sit on left of black flower

21 c/p size this down by 30% pull to sit on bottom right of mask

60 c/p rotate 45° to the left pull to sit even with boards on the ground

10 c/p size this down by 35% pull to sit on boards by mask

28 c/p size this down by 25% apply the same setting for the Brightness/contrast to make it a darker black

Click on bottom layer of your tag

16 c/p 2 times on right edge of the frame (but behind) take a 3^rd copy and pull it to the left edge of the frame

Open paper 7 using your rectangle tool draw one behind the frame, convert to a raster layer

Click on top layer of your tag; add a new raster layer for the credits to artist and kit maker, add a saying to the tag and your done

©LadyDragus~ 2023